SFFECO Fire Extinguisher Range: Powder, CO2, Foam and Wheeled Models

SFFECO Fire Extinguisher Range: Powder, CO2, Foam and Wheeled Models

The SFFECO fire extinguisher range is made by the Saudi Factory for Fire Equipment Co. and covers portable ABC dry powder units (stored pressure and cartridge type), CO2 extinguishers, AFFF foam extinguishers and wheeled trolley units up to 150 kg. Selection starts with the expected fire type, then the capacity, then a check that the exact model is approved by the Saudi Standards, Metrology and Quality Organization (SASO).

This article lists the models as they appear in the official datasheet of SFFECO’s Riyadh factory and in the catalogue pages on the SFFECO Global website, and explains where each extinguisher fits. It contains no prices: extinguisher prices change with capacity, quantity and project requirements. AZEIDK supplies SFFECO products in Saudi Arabia as part of its fire fighting systems work.

Key takeaways

  • SFFECO (Saudi Factory for Fire Equipment Co.) has made fire fighting equipment since 1983, with its factory and head office in Riyadh’s 2nd Industrial Area.
  • The Saudi datasheet marks which models are SASO approved, such as PD6 and PD12 in dry powder and CD 5-G and CD 6-G in CO2.
  • ABC powder suits general, liquid, gas and electrical fires. CO2 suits electrical equipment and flammable liquids.
  • The AFFF foam range in the SFFECO Global catalogue carries BSI Kitemark (EN3) approval and CE marking, according to the website.
  • Trolley units come in dry powder up to 150 kg, CO2 up to 60 kg and foam up to 132 litres.
In this article
  1. Who makes the SFFECO fire extinguisher?
  2. SFFECO ABC dry powder extinguishers: which models are approved?
  3. SFFECO CO2 extinguishers
  4. SFFECO AFFF foam extinguishers
  5. SFFECO wheeled (mobile trolley) extinguishers
  6. Where does each SFFECO extinguisher fit?
  7. What drives the cost of SFFECO extinguishers?
  8. Frequently asked questions
  9. Conclusion

Who makes the SFFECO fire extinguisher?

SFFECO stands for Saudi Factory for Fire Equipment Co. Its datasheet (revision SF-KSA/TDS/01-2025/REV 0) gives the factory and head office address as the 2nd Industrial Area on Al-Kharj Road in Riyadh, lists offices in Jeddah, Madinah and Dammam, and mentions facilities in Riyadh and Dubai. The SFFECO Global website describes itself as based in JAFZA, Dubai, and founded in 1983.

SFFECO groups its extinguishers into three types: portable, mobile trolley and automatic. The agents are powder, foam, water, wet chemical and carbon dioxide. This article covers powder, CO2, foam and trolley units because they are the most requested on projects. Automatic units are covered in our article on the automatic ceiling fire extinguisher.

SFFECO ABC dry powder extinguishers: which models are approved?

The Saudi datasheet splits dry powder units into two types. Stored pressure units use nitrogen or dry air as the propellant, with a working pressure of 12 to 15 bar, a test pressure of 30 bar and a storage temperature of -20 to +60 °C. Cartridge units use an internal or external CO2 cartridge, and the body is only pressurized when the unit is operated.

ModelTypeCapacityThrow range (m)Discharge time (s)SASO approved
PD1Stored pressure1 kg26–10Yes
PD2Stored pressure2 kg26–10Yes
PD3Stored pressure3 kg36–12Not stated
PD6Stored pressure6 kg6.510–14Yes
PD10Stored pressure10 kg8.514–22Yes
PD12Stored pressure12 kg8.514–22Yes
PC6External cartridge6 kg6.510–20Yes
PC12External cartridge12 kg7.512–30Yes
PDC6Internal cartridge6 kg6.59–12Yes
PDC10Internal cartridge10 kg8.512–15Yes
PDC12Internal cartridge12 kg8.515–18Yes

The datasheet also lists two pound-rated models, PDB5 (5 lb) and PDB10 (10 lb, SASO approved). The SFFECO Global catalogue shows a separate series with codes ending in D, such as PD6D rated 34A-183B-C and PD12D rated 55A-233B-C, and states BSI Kitemark (EN3) approval and CE marking for it. The two series differ in codes and data, so ask for the datasheet of the exact model being supplied. For a general comparison of powder types, see our dry powder extinguisher guide.

SFFECO CO2 extinguishers

CO2 leaves no residue, so it is chosen for electrical panels, server rooms, sensitive equipment and flammable liquids. The datasheet specifies smooth steel cylinders tested at 250 bar, a maximum effective range of 5 m and a storage temperature of -20 to +60 °C.

ModelCapacityTotal weightHoseDischarge time (s)SASO approved
CD 3-G3 kg10.5 kgHorn only9–11Not stated
CD 5-G5 kg16.3 kg1220 mm9–11Yes
CD 6-G6 kg18.7 kg1220 mm9–11Yes
CD 5-L2.27 kg8.45 kgHorn only7–9Yes
CD 10-L4.54 kg15.35 kg1220 mm9–11Not stated

Full details and the datasheet are on AZEIDK’s SFFECO portable CO2 extinguishers page. For how this type is used and where it falls short, see our CO2 fire extinguisher guide.

SFFECO AFFF foam extinguishers

Foam suits general fires (Class A) and flammable liquid fires (Class B), so it is common in warehouses, workshops and car parks. The SFFECO Global page lists these models and states BSI Kitemark (EN3) approval and CE marking for the range:

ModelCapacityAgentRatingPropellant
FX3D3 L6% AFFF foam13A-70BNitrogen
FX6D6 L6% AFFF foam21A-144BNitrogen
FX9D9 L6% AFFF foam27A-183BNitrogen
FXH6D6 L16.7% high performance foam27A-183BNitrogen
FXC6D6 L6% AFFF foam21A-144BCO2 cartridge
FXC9D9 L6% AFFF foam21A-183BCO2 cartridge
FXHC6D6 L16.7% high performance foam27A-183BCO2 cartridge
FXHC9D9 L16.7% high performance foam34A-233BCO2 cartridge

The Saudi datasheet we reviewed does not detail foam models, so check the model’s Saudi approval on SABER before it goes into a project.

SFFECO wheeled (mobile trolley) extinguishers

Trolley units are used where the risk is large or the area is wide: warehouses, fuel stations, factories and open work sites. The SFFECO Global catalogue shows these families:

FamilyModelsCapacitiesManufacturer notes
ABC powder, stored pressureTDP25, TDP30, TDP50, TDPS75, TDPS100, TDPS15025 to 150 kgNitrogen propellant; manufacturer lists Classes A, B, C and electrical up to 35 kV
ABC powder, cartridgeTPC25, TPC30, TPC50, TPCS75, TPCS100, TPCS15025 to 150 kgCO2 cartridge
ABC powder (KM series)SF-MFE-TM-25SPP-D, 25COP-D, 50SPP-D, 50COP-D25 and 50 kgListed as KM Certified on the website
Carbon dioxideTC10, TC25, TC30, TC60, TCB10010 to 60 kg (TCB100: 45.5 kg)Stored pressure; manufacturer lists electrical use up to 35 kV
AFFF foamTF25, TF50, TF100, TF10G, TF35G, TFC50, TFC100, TFC35G25 to 132 litresNitrogen or CO2 cartridge

Where does each SFFECO extinguisher fit?

  • Offices, shops and corridors: 6 kg ABC powder (such as PD6 or PDC6), with a CO2 unit near electrical panels.
  • Server rooms and distribution boards: 5 or 6 kg CO2 (CD 5-G or CD 6-G), because it leaves no residue.
  • Warehouses, workshops and car parks: AFFF foam or 12 kg powder, plus trolley units where large quantities of flammable materials are stored.
  • Factories and fuel stations: powder or foam trolley units, with capacity and number set in the design.
  • Commercial kitchens: need a wet chemical extinguisher for Class K. Wet chemical is among SFFECO’s listed agents, but the sources we reviewed give no model details.

The number, placement and travel distance of extinguishers come from the requirements adopted for the project. See our NFPA 10 portable extinguishers guide, and use the fire extinguisher calculator for a first estimate.

What drives the cost of SFFECO extinguishers?

We do not publish prices because they change, but the cost drivers are clear: the agent, the capacity, the propellant type (stored pressure or cartridge), the approvals the project requires, the quantity, accessories such as brackets and cabinets, and the cost of maintenance and refilling over the extinguisher’s life.

Frequently asked questions

Are SFFECO extinguishers made in Saudi Arabia?

Yes. SFFECO is the Saudi Factory for Fire Equipment Co., with its factory in Riyadh and a facility in Dubai, according to its datasheet.

Are SFFECO extinguishers SASO approved?

The Saudi datasheet marks approved models, such as PD1, PD2, PD6, PD10, PD12, CD 5-G, CD 6-G and CD 5-L. Check any model not marked on the SABER platform.

What is the difference between stored pressure and cartridge powder extinguishers?

In a stored pressure unit the body is always pressurized and the pressure is read on the gauge. In a cartridge unit the propellant sits in a separate CO2 cartridge, and the body is only pressurized when the unit is operated.

What is the largest SFFECO wheeled extinguisher?

In the SFFECO Global catalogue, powder trolley units go up to 150 kg (TDPS150 and TPCS150), foam units up to 132 litres and CO2 units up to 60 kg.

Is an SFFECO CO2 extinguisher suitable for general fires?

The Saudi datasheet states that portable CO2 units are for Class B and electrical fires. For general fires, choose ABC powder or foam.

Does AZEIDK maintain SFFECO extinguishers?

AZEIDK provides fire extinguisher maintenance with its own maintenance team as part of its maintenance contracts in Saudi Arabia.

Conclusion

The SFFECO fire extinguisher range covers powder, CO2, foam and trolley units with clearly coded models. Start with the fire type, choose the capacity, then match the model to the official datasheet and check its approval on SABER. Do not mix codes from the Saudi datasheet with codes from the SFFECO Global catalogue when writing a bill of quantities.

Need SFFECO extinguishers for your project? Send the facility type and areas, and the AZEIDK team will propose types and capacities and prepare the datasheets needed for approval. Talk to the AZEIDK team

Share this article
This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.