The SelectFire Plus SFP-IR3-EXD is an advanced point-type triple infrared flame detector designed for rapid and accurate fire detection in hazardous and demanding industrial environments.
The detector uses three specialised pyroelectric sensors operating at 3.8μm, 4.4μm and 5.3μm wavelengths to analyse the infrared radiation signature emitted by flames.
Advanced algorithms compare the intensity and ratio of signals across all three infrared bands, helping distinguish genuine flames from false sources such as sunlight, artificial lighting, heated machinery and hot surfaces.
The detector also analyses the low-frequency flickering characteristics of fire, improving flame recognition and false-alarm rejection.
Key Features:
• Point-type triple infrared IR3 flame detector.
• Uses three sensors operating at 3.8μm, 4.4μm and 5.3μm.
• Suitable for detecting hydrocarbon fires and other combustible materials.
• Capable of detecting flames from some non-carbonaceous materials such as hydrogen.
• Flame flicker analysis for reliable fire recognition.
• Advanced signal-ratio algorithms across three infrared bands.
• High immunity to false alarms caused by sunlight, lighting and heated objects.
• Designed to operate even when the lens is contaminated by oil, dust, water or ice.
• Five adjustable sensitivity levels.
• Horizontal field of view of 110 degrees.
• Red LED remains lit during alarm.
• Three relay outputs for fire, fault and auxiliary conditions.
• 4–20mA output.
• RS-485 communication.
• Fire bus output.
• Aluminium alloy enclosure.
• Explosion-proof design.
• IP66 protection rating.
• Suitable for factories, fuel facilities, airports, warehouses, oil and petrochemical installations.
Detection Ranges Shown in the Datasheet:
• N-Heptane: Up to 60 metres for a 0.3 × 0.3m fire.
• Gasoline: Up to 55 metres for a 0.3 × 0.3m fire.
• Alcohol: Up to 50 metres for a 0.3 × 0.3m fire.
Detectable Materials and Applications:
• Aviation fuels and kerosene.
• Ethanol and methylated spirits.
• Petrol and paraffin.
• Coal, cotton, grain and feeds.
• Paper, refuse and wood.
• Butane, propane and natural gas.
• Hydrogen and other gases.
Technical Specifications:
• Sensor Type: Pyroelectric Sensor.
• Detector Type: Point-Type Infrared Flame Detector.
• Operating Voltage: 24V DC.
• Power Consumption: Less than 1W.
• Horizontal Field of View: 110°.
• Sensitivity: Five adjustable levels.
• RS-485 Output: 1.
• Fire Bus Output: 1.
• 4–20mA Output: 1.
• Relay Outputs: 3.
• Relay Contact Rating: 1A at 30V DC.
• Operating Temperature: -25°C to +75°C.
• Storage Temperature: -40°C to +80°C.
• Operating Humidity: ≤95% RH non-condensing.
• IP Rating: IP66.
• Conduit Entry Size: M20.
• Casing Material: Aluminium Alloy ADC12.
• Colour: Reddish Black.
• Dimensions: 146 × 123 × 133mm.
• Weight: 1.55kg without installation bracket.
Approvals:
• ATEX.
• IECEx.
• CE.
• UKCA.
• Ex db IIC T6 Gb.
• Ex tb IIIC T80°C Db.
Product number: SFP-IR3-EXD.
