Alcatel PBX in Saudi Arabia: OmniPCX, OXO Connect and OmniSwitch from Alcatel-Lucent Enterprise

Alcatel PBX in Saudi Arabia: OmniPCX, OXO Connect and OmniSwitch from Alcatel-Lucent Enterprise

An Alcatel PBX today means one of two Alcatel-Lucent Enterprise (ALE) platforms: OXO Connect Evolution for small and mid-sized businesses with up to 300 users, and OmniPCX Enterprise for large and multi-site organisations, with up to 15,000 IP or SIP users per server according to the datasheet. Alongside the PBX sit OmniSwitch switches and OmniAccess Stellar Wi-Fi access points, which power IP phones and access points over the network cable (PoE). This guide covers the Alcatel range AZEIDK supplies through its network and communication systems, and when expanding an existing Alcatel system costs less than moving to another platform.

Key takeaways

  • OXO Connect Evolution: a compact IP PBX for up to 300 IP or SIP devices and 120 SIP trunks per the datasheet, and it can even be powered over PoE.
  • OmniPCX Enterprise (Purple): up to 15,000 IP/SIP users per server and up to 100 servers in one network.
  • Phones: the ALE DeskPhones range (ALE-300, ALE-400, ALE-500), the 8378 DECT IP base station and the rugged 8262 DECT handset.
  • Network: OmniSwitch 6360 and 6560 PoE switches, plus Wi-Fi 6 and Wi-Fi 7 access points from the OmniAccess Stellar family.
  • If your Alcatel system is running, check compatibility and licensing before thinking about replacement.
In this article
  1. Which Alcatel products does AZEIDK supply?
  2. Alcatel OXO Connect Evolution: when is it enough?
  3. OmniPCX Enterprise: the PBX for large organisations
  4. Alcatel DECT cordless phones for large sites
  5. Expand your existing Alcatel PBX or move to another platform?
  6. OmniSwitch switches and OmniAccess Stellar access points
  7. What drives the cost of an Alcatel PBX?
  8. Frequently asked questions
  9. Conclusion

Which Alcatel products does AZEIDK supply?

The Alcatel brand page on the AZEIDK site lists ten ALE products in two groups: voice communications, and networking and Wi-Fi. The figures below come from each product’s official datasheet.

ProductCategoryBest fitFrom the datasheet
OXO Connect EvolutionIP PBXSmall and mid-sized businesses300 IP/SIP devices, 120 SIP trunks, voicemail up to 500 mailboxes
OmniPCX EnterpriseEnterprise PBXLarge and multi-branch organisations15,000 IP/SIP users per server, 100 servers in one network
ALE-300 / ALE-400 / ALE-500IP desk phonesOffices, reception, management3.5 to 5.5 inch screens, two gigabit ports, PoE 802.3af
8378 DECT IP-xBSDECT base stationSites where staff move aroundUp to 11 simultaneous calls, PoE powered
8262Rugged DECT handsetWarehouses, hospitals, maintenance teamsIP65, alarm button and man-down alarm
OmniSwitch 6360Access switchOffice floors and branches8, 24 or 48 x 1G ports, PoE versions up to 760 W
OmniSwitch 6560 / 6560ELayer 3 access switchLarger networks and newer Wi-Fi2.5G/5G ports on some models, 10G uplinks
AP1301 and AP1511Indoor Wi-FiOffices and hotelsAP1301 Wi-Fi 6; AP1511 tri-band Wi-Fi 7
AP1360Outdoor Wi-FiYards, car parks, open sitesIP67, operates from -40 to 65°C

Alcatel OXO Connect Evolution: when is it enough?

OXO Connect Evolution is a half-width 1U unit. Its datasheet positions it for businesses with up to 300 users, with capacity for 300 IP or SIP devices and 120 SIP trunks, and voicemail for up to 500 mailboxes and 200 hours. It can draw power from a PoE switch port, and it has two FXS ports for analogue devices such as a fax machine or an older phone.

That suits an office, a branch, a small hotel or a mid-sized clinic. The datasheet also covers integration with ALE’s Rainbow service for apps and mobile calling, and support for 8378 DECT bases, so desk phones and cordless handsets can run on the same system.

OmniPCX Enterprise: the PBX for large organisations

OmniPCX Enterprise (called OXE Purple in the datasheet) runs on HP ProLiant servers or virtual platforms such as VMware and Hyper-V. It serves up to 15,000 IP or SIP users per server, and up to 100 servers and 100,000 users in one network. It supports duplicated servers and databases, plus a Passive Communication Server (PCS) that keeps a branch running if its link to the main site drops.

The platform fits organisations with several buildings or branches that need one numbering plan and high call continuity.

Alcatel DECT cordless phones for large sites

In warehouses, hospitals and hotels staff move all day, and a desk phone is not enough. This is where the 8378 DECT IP base comes in: it connects to the network, draws PoE power, carries up to 11 simultaneous calls, and covers between 50 and 300 m depending on location and environment, per the datasheet. It pairs with handsets such as the 8262, built to IP65 with a screen that survives a 2 m drop, plus alarm functions such as an alarm button, man-down and no-movement alerts, which help security and maintenance staff who work alone. For areas with flammable gas or dust there is an 8262Ex version, per the datasheet. Base count comes from an on-site coverage survey, not from floor area on the drawing alone.

Expand your existing Alcatel PBX or move to another platform?

If your site has run an Alcatel PBX for years, the real question at expansion time is not which brand is better, but what it costs to keep the system versus replace it. These points are checked on site before any quotation:

  • Current software release and licences: how many licences are free and whether the release supports new phones and bases. This decides whether expansion needs licences only or an upgrade.
  • Existing phones and cabling: if current handsets work and match the release, keeping them saves a large part of the cost.
  • External lines: whether the carrier link is a SIP trunk or traditional lines, and how many channels you really need.
  • Integrations: hotel, contact centre or alarm systems linked to the PBX, since a platform change means reconnecting them.
  • Network: how many PoE ports and how much PoE power your current switches have, because every IP phone and DECT base draws power from them.

If the existing system can take the growth, adding licences and phones is usually simpler than changing platform. If the release is old and cannot support what you need, compare it with other platforms such as Avaya or the systems in the IP telephone systems section. Base the decision on a real site survey, not on the brand name.

OmniSwitch switches and OmniAccess Stellar access points

IP phones, Wi-Fi access points and DECT bases all need a PoE port, so the switch belongs in the same decision. The OmniSwitch 6360 is a family of gigabit access switches in 10, 24 and 48-port versions, with total PoE budget from 120 W on the P10 up to 760 W on the PH48 and P48X per the datasheet, and stacking of up to 8 units for the 24 and 48-port models.

The OmniSwitch 6560 is a Layer 3 series, with some multi-gigabit models offering 2.5G and 5G ports, such as the OS6560E-P24Z8. These matter for newer access points: the AP1511, for example, is Wi-Fi 7 with a multi-gigabit uplink of up to 5G and a worst-case draw of 23.4 W on 802.3at PoE, per its datasheet. The AP1360 is an IP67 outdoor unit for car parks and yards.

To size PoE power on a switch the same way we do for cameras, see our guide to PoE switch power budget.

What drives the cost of an Alcatel PBX?

We do not list prices because they depend on the project and licensing, but the main drivers are clear: the platform (OXO or OmniPCX Enterprise), user and licence count, the type and number of phones, DECT bases and handsets, the number of SIP channels, new PoE switches if needed, and structured cabling and programming work. Ask for the software release and licence type to be stated clearly in the quotation, since they decide how far you can expand later.

Frequently asked questions

What is the difference between Alcatel OXO and OmniPCX Enterprise?

OXO Connect Evolution serves businesses of up to 300 users in a compact unit. OmniPCX Enterprise is for large organisations, with up to 15,000 IP/SIP users per server and several servers networked together.

Do Alcatel phones run on PoE?

Yes. ALE DeskPhones use 802.3af PoE, and so does the 8378 DECT base, so you need a switch with enough PoE ports.

Can I add cordless phones to an Alcatel PBX?

Yes, through 8378 DECT IP bases and DECT handsets such as the 8262. The datasheet gives up to 80 bases on OXO Connect and up to 2032 bases per node on OmniPCX Enterprise.

Do I need to replace the whole PBX to expand?

Not necessarily. If the current release supports the additions and licences are available, adding licences and phones is often simpler. This is settled after checking the system release on site.

Does AZEIDK supply Alcatel switches with the PBX?

Yes. OmniSwitch 6360 and 6560 switches and OmniAccess Stellar access points are part of the Alcatel range AZEIDK lists, selected by port count and PoE budget.

Which Alcatel phone suits a warehouse or hospital?

The 8262 is built for tough environments with an IP65 rating, an alarm button and a man-down function, and it works with DECT bases connected to the PBX.

Conclusion

Choose an Alcatel PBX by the size of the organisation: OXO Connect Evolution up to 300 users, OmniPCX Enterprise for large organisations. Before any expansion, check your system release, licences, phones and PoE ports; those four points decide whether staying on Alcatel is the cheaper path.

Running an Alcatel PBX that needs to grow, or planning a new system? Send your user count and existing equipment, and the AZEIDK team will help you choose the platform, phones and switches, and supply and install them as part of your low current systems. Talk to the AZEIDK team

Share this article
This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.