Request a Quote

AZEIDK Solutions

Integrated Engineering Solutions for Safer Facilities

Fire protection, low current systems, and electromechanical solutions.

Explore All Solutions →

Fire Protection & Life Safety

Fire Alarm SystemsAddressable and conventional detection and alarm Fire Fighting SystemsSprinkler networks, fire pumps and components Special Fire Suppression SystemsGas and aerosol systems for sensitive equipment Kitchen Fire Suppression SystemsHood and cooking equipment protection Smoke Extraction & Emergency VentilationSmoke control to keep escape routes usable Fire-Rated Doors & Emergency ExitsFire-rated doors and exit hardware

Low Current Systems

Integrated Low Current SystemsIntegrated security, surveillance, networks and communications Security & Surveillance SystemsCCTV, access control and intercom Network & Communication SystemsStructured cabling, networks and IP telephony

Electromechanical & Contracting

HVAC, Electrical & Plumbing WorksElectromechanical (MEP) works coordinated with fire protection and low current systems Smart Buildings & Systems IntegrationNetworks, CCTV, access control, fire alarm and BMS working as one General ContractingProject delivery and trade coordination, with life safety built in from day one

Engineering delivery process

Regulatory & compliance support

Fire Alarm Systems

Addressable and conventional fire alarm systems, designed, installed and tested by AZEIDK

Fire alarm products Project: Al Andalus Business Center

Explore Fire Alarm Systems →

Need the right engineering solution?

Talk to the AZEIDK Team

Request a Quote

Network Switches & Wi-Fi

UTEPO UTP3318S-PSB250-M0 16-Port Gigabit PoE+ 2-Port Gigabit SFP Unmanaged Ethernet Switch

1U rack-mount unmanaged switch with sixteen Gigabit PoE+ ports and two Gigabit SFP uplinks, powered directly from AC mains. DIP switches select Default, QoS, CCTV or VLAN operating modes. Two 24-port models with combo uplinks share the same platform.

Brand

UTEPO

Product Details

Product Overview

1U rack-mount unmanaged switch with sixteen Gigabit PoE+ ports and two Gigabit SFP uplinks, powered directly from AC mains. DIP switches select Default, QoS, CCTV or VLAN operating modes. Two 24-port models with combo uplinks share the same platform.

Model	UTP3318S-PSB250-M0
Downlink ports	16*10/100/1000Base-T PoE+ RJ-45 (Auto-MDI/MDI-X)
Uplink ports	2*1000Base-X SFP
PoE standard	IEEE 802.3af/at, End-span
PoE budget	30W max for each port, 230W max for whole switch
Switching capacity	128Gbps / non-blocking
MAC table	8K, auto learning
Input voltage	100~240V AC, 50~60Hz
Power consumption	≤250W (Full load including PoE)
Port surge protection	6kV
Dimensions (WDH)	440mm178.8mm44mm
Operating temperature	-10℃~50℃, 10%~90% (Non-condensation)
Variants	UTP3324S-PSB250-M0 and UTP3324S-PSB410-M0: 2410/100/1000Base-T PoE+ RJ-45, 2GE Combo Ports (SFP Port is prior to RJ-45 Port)

Typical applications

Medium CCTV systems in schools, warehouses and factories
Access-layer switching for IP phones and access points
Network cabinets in offices and retail units

Source: UTEPO official product page and official datasheet. Supplied in Saudi Arabia by AZEIDK with installation and technical support.

Technical Documents

Product Catalogue

View the product’s full specifications and technical information in the official catalogue.

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.