Request a Quote

AZEIDK Solutions

Integrated Engineering Solutions for Safer Facilities

Fire protection, low current systems, and electromechanical solutions.

Explore All Solutions →

Fire Protection & Life Safety

Fire Alarm SystemsAddressable and conventional detection and alarm Fire Fighting SystemsSprinkler networks, fire pumps and components Special Fire Suppression SystemsGas and aerosol systems for sensitive equipment Kitchen Fire Suppression SystemsHood and cooking equipment protection Smoke Extraction & Emergency VentilationSmoke control to keep escape routes usable Fire-Rated Doors & Emergency ExitsFire-rated doors and exit hardware

Low Current Systems

Integrated Low Current SystemsIntegrated security, surveillance, networks and communications Security & Surveillance SystemsCCTV, access control and intercom Network & Communication SystemsStructured cabling, networks and IP telephony

Electromechanical & Contracting

HVAC, Electrical & Plumbing WorksElectromechanical (MEP) works coordinated with fire protection and low current systems Smart Buildings & Systems IntegrationNetworks, CCTV, access control, fire alarm and BMS working as one General ContractingProject delivery and trade coordination, with life safety built in from day one

Engineering delivery process

Regulatory & compliance support

Fire Alarm Systems

Addressable and conventional fire alarm systems, designed, installed and tested by AZEIDK

Fire alarm products Project: Al Andalus Business Center

Explore Fire Alarm Systems →

Need the right engineering solution?

Talk to the AZEIDK Team

Request a Quote

Network Switches & Wi-Fi

Cisco Wireless 9176 Series Access Points (CW9176I / CW9176D1)

The Wireless 9176 is Cisco’s Wi-Fi 7 indoor access point with 4×4 radios on 2.4, 5 and 6 GHz and a 10G multigigabit Ethernet port.

Brand

Cisco

Product Details

Product Overview

The Wireless 9176 is Cisco's Wi-Fi 7 indoor access point with 4×4 radios on 2.4, 5 and 6 GHz and a 10G multigigabit Ethernet port. It also includes a GNSS receiver, an ultra-wideband radio for location and a dedicated IoT radio. The same hardware can be managed on-premises through a Catalyst 9800 controller or from the Meraki cloud.

Model	CW9176I / CW9176D1
Models	CW9176I (omnidirectional internal antenna), CW9176D1 (directional internal antenna)
Wi-Fi standard	IEEE 802.11be (Wi-Fi 7); 802.11ax/ac/n supported
Radios	Tri-radio 2.4, 5 and 6 GHz; dedicated IoT radio; UWB radio; GNSS; BLE 5.3
Spatial streams	4×4 uplink/downlink MU-MIMO with four spatial streams
Ethernet	1x RJ-45 multigigabit (100M, 1G, 2.5G, 5G, 10G)
Power	802.3bt (Class 5, UPOE) 39 W max for full performance; 802.3at (PoE+) up to 25.5 W
Management	Catalyst 9800 Series controllers / Catalyst Center (on-premises) or Meraki dashboard (cloud)
Operating temperature	0° to 50°C, 10% to 90% noncondensing humidity
Dimensions	24 x 24 x 5.1 cm (without mounting brackets)
Weight	1.56 kg

Typical applications

New-build offices and headquarters specified for Wi-Fi 7
University campuses and auditoriums
Hospitals using asset tracking and location services
High-density venues and conference centres

Source: Cisco official product page and official datasheet. Supplied in Saudi Arabia by AZEIDK with installation and technical support.

Technical Documents

Product Catalogue

View the product’s full specifications and technical information in the official catalogue.

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.