Request a Quote

AZEIDK Solutions

Integrated Engineering Solutions for Safer Facilities

Fire protection, low current systems, and electromechanical solutions.

Explore All Solutions →

Fire Protection & Life Safety

Fire Alarm SystemsAddressable and conventional detection and alarm Fire Fighting SystemsSprinkler networks, fire pumps and components Special Fire Suppression SystemsGas and aerosol systems for sensitive equipment Kitchen Fire Suppression SystemsHood and cooking equipment protection Smoke Extraction & Emergency VentilationSmoke control to keep escape routes usable Fire-Rated Doors & Emergency ExitsFire-rated doors and exit hardware

Low Current Systems

Integrated Low Current SystemsIntegrated security, surveillance, networks and communications Security & Surveillance SystemsCCTV, access control and intercom Network & Communication SystemsStructured cabling, networks and IP telephony

Electromechanical & Contracting

HVAC, Electrical & Plumbing WorksElectromechanical (MEP) works coordinated with fire protection and low current systems Smart Buildings & Systems IntegrationNetworks, CCTV, access control, fire alarm and BMS working as one General ContractingProject delivery and trade coordination, with life safety built in from day one

Engineering delivery process

Regulatory & compliance support

Fire Alarm Systems

Addressable and conventional fire alarm systems, designed, installed and tested by AZEIDK

Fire alarm products Project: Al Andalus Business Center

Explore Fire Alarm Systems →

Need the right engineering solution?

Talk to the AZEIDK Team

Request a Quote

Network Switches & Wi-Fi

Cisco Catalyst 9166 Series Access Points (CW9166I / CW9166D1)

The Catalyst 9166 is a tri-band Wi-Fi 6E indoor access point with 4×4 radios on 2.4, 5 and 6 GHz and a 5G multigigabit Ethernet uplink.

Brand

Cisco

Product Details

Product Overview

The Catalyst 9166 is a tri-band Wi-Fi 6E indoor access point with 4×4 radios on 2.4, 5 and 6 GHz and a 5G multigigabit Ethernet uplink. It can run under a Catalyst 9800 wireless controller or be managed from the Meraki cloud dashboard. A directional-antenna version (CW9166D1) is available for halls and corridors.

Model	CW9166I / CW9166D1
Models	CW9166I (integrated omni-directional antennas), CW9166D1 (integrated directional antennas); cloud-managed CW9166I-MR, CW9166D1-MR
Wi-Fi standard	802.11ax (Wi-Fi 6 and Wi-Fi 6E)
Radios	2.4 GHz, 5 GHz and 6 GHz, each 4×4 MIMO; dual-band XOR radio (6 GHz / secondary 5 GHz); Bluetooth Low Energy 5.1
Highest 802.11ax PHY rate	7.78 Gbps (4×4 160 MHz on 6 GHz)
Ethernet	1x multigigabit RJ-45 (100M, 1G, 2.5G, 5G)
Power	802.3bt (UPOE) 30.5 W max; 802.3at (PoE+) 25.5 W; 54V DC input supported
Management	Catalyst 9800 Series Wireless Controllers (physical or virtual) or Meraki dashboard (cloud)
Operating temperature	CW9166I: 0°C to 50°C; CW9166D1: -20°C to 50°C
Dimensions (W x L x H)	CW9166I: 241.3 x 241.3 x 56.9 mm
Weight	CW9166I: 1.60 kg

Typical applications

High-density Wi-Fi in offices, conference rooms and lecture halls
Hotels and hospitals needing 6 GHz capacity
Malls and airports (directional D1 model for large open areas)

Source: Cisco official product page and official datasheet. Supplied in Saudi Arabia by AZEIDK with installation and technical support.

Technical Documents

Product Catalogue

View the product’s full specifications and technical information in the official catalogue.

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.