Request a Quote

AZEIDK Solutions

Integrated Engineering Solutions for Safer Facilities

Fire protection, low current systems, and electromechanical solutions.

Explore All Solutions →

Fire Protection & Life Safety

Fire Alarm SystemsAddressable and conventional detection and alarm Fire Fighting SystemsSprinkler networks, fire pumps and components Special Fire Suppression SystemsGas and aerosol systems for sensitive equipment Kitchen Fire Suppression SystemsHood and cooking equipment protection Smoke Extraction & Emergency VentilationSmoke control to keep escape routes usable Fire-Rated Doors & Emergency ExitsFire-rated doors and exit hardware

Low Current Systems

Integrated Low Current SystemsIntegrated security, surveillance, networks and communications Security & Surveillance SystemsCCTV, access control and intercom Network & Communication SystemsStructured cabling, networks and IP telephony

Electromechanical & Contracting

HVAC, Electrical & Plumbing WorksElectromechanical (MEP) works coordinated with fire protection and low current systems Smart Buildings & Systems IntegrationNetworks, CCTV, access control, fire alarm and BMS working as one General ContractingProject delivery and trade coordination, with life safety built in from day one

Engineering delivery process

Regulatory & compliance support

Fire Alarm Systems

Addressable and conventional fire alarm systems, designed, installed and tested by AZEIDK

Fire alarm products Project: Al Andalus Business Center

Explore Fire Alarm Systems →

Need the right engineering solution?

Talk to the AZEIDK Team

Request a Quote

Network Switches & Wi-Fi

Cisco Catalyst 1300 / 1300X Series Managed Switches

The Catalyst 1300 is Cisco’s fully managed, stackable switch range for growing businesses, with Gigabit, 2.5G and 10G port options and PoE+ budgets up to 740W.

Brand

Cisco

Product Details

Product Overview

The Catalyst 1300 is Cisco's fully managed, stackable switch range for growing businesses, with Gigabit, 2.5G and 10G port options and PoE+ budgets up to 740W. Up to eight units can be stacked, and the switches provide Layer 3 IPv4/IPv6 routing, with OSPF on the 1300X models. Cisco lists Catalyst 1300 models as the replacements for most Catalyst 1000 switches.

Model	C1300 / C1300X
C1300-24P-4X	24x 10/100/1000 30W PoE+ ports with 195W power budget, 4x 10 Gigabit SFP+
C1300-48FP-4X	48x 10/100/1000 30W PoE+ ports with 740W power budget, 4x 10 Gigabit SFP+
C1300-24MGP-4X	16x 10/100/1000 30W PoE+, 8x 2.5G 30W PoE+, 4x 10 Gigabit SFP+; 375W PoE budget
Stacking	Up to eight switches per stack; up to 400 ports managed as a single system with hardware failover
Switching capacity (largest: C1300-24XS/24XT/24XTS)	480 Gbps
Layer 3	Wire-speed IPv4 and IPv6 routing, RIP v2, policy-based routing, DHCP relay, IPv4 DHCP server
OSPF	OSPF v2 and v3 on C1300X models only
MAC table	16,000 addresses (1 Gigabit Ethernet SKUs); up to 32,000 (10 Gigabit and C1300X SKUs)
Operating temperature	-5° to 50°C (cold start minimum 0°C)
Warranty	Limited lifetime with return-to-factory replacement

Typical applications

Main switch for small and mid-size office buildings
PoE+ for IP cameras, phones and Wi-Fi APs in hotels and clinics
10G aggregation switch for small campuses (24XS/24XT models)
Factory and warehouse network rooms

Source: Cisco official product page and official datasheet. Supplied in Saudi Arabia by AZEIDK with installation and technical support.

Technical Documents

Product Catalogue

View the product’s full specifications and technical information in the official catalogue.

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.