School gates differ from office gates in three ways: very short entry and dismissal peaks, students of different ages and heights, and parents who collect their children at the door. So the turnstile type is chosen by school stage and lane count, student attendance by face or card is tied to the gate itself, and the dismissal route is kept apart from the visitor route. This article explains how we design school and university gates and student attendance as part of AZEIDK low current systems.
Key takeaways
- Size the number of lanes from the dismissal peak, not the daily average, because the whole school leaves within minutes.
- Tripod turnstiles suit intermediate and secondary students and universities; young children need a different, supervised route.
- Face recognition is faster at peak and touch-free; cards cost less but get lost and lent.
- A turnstile is not an emergency exit: provide a side emergency door and link gate release to the fire alarm system.
- Student face data is sensitive personal data and should stay on the school’s own server with limited access.
What makes school gates different from office gates?
In an office, staff arrive over roughly an hour, so two or three lanes are enough. In a school, most students arrive in a short window before morning assembly and all of them leave after the last lesson in even less time. That peak sets the number of lanes. A school entrance designed on the average will jam at the gate every day.
The second difference is the user. A first-grade pupil does not handle a turnstile the way a university student does, and often carries a bag wider than they are. The third is that the school’s responsibility does not end when a student passes the gate; it ends when the student is handed to a parent or to school transport. School gate design is a traffic management project before it is an equipment project. For the basics of every gate type see our guide to turnstiles and access gates; here we apply them to schools and universities.
Types of school and university gates
| Type | Where it fits in a school or university | What to watch |
|---|---|---|
| Tripod turnstile | Student entrance for intermediate and secondary schools, faculty entrances on campus | The arm is at a fixed height, so it does not suit young children or trolleys |
| Speed gates (flap or swing) | Main entrances that need faster passage and an open look | A wider lane for wheelchair users, trolleys and large bags |
| Full height turnstile | Outer perimeter gates, university housing and sports grounds | Slower at peak, so not used alone as the main student entrance |
| Barrier gate | Vehicle entrance for teachers and school buses | Keep the vehicle route fully separate from the pedestrian route |
Models available from AZEIDK include ZKTeco tripod turnstiles from the MTS1000 series, the dual-lane TS1200 series and the TS5000A, full height turnstiles from the FHT2400D and FHT3300/FHT3400 series, and barrier gates from Hikvision and BFT. See the turnstiles and parking barriers range, for example the ZKTeco FHT2400D full height turnstile.
Young children and kindergartens
For kindergartens and early grades we do not recommend a turnstile for the child. A supervised entrance works better, with an attendance terminal the child or the supervisor uses, and a camera on the entrance. A turnstile here serves parents and visitors where needed, not the children.
Student attendance: face or card?
The attendance reader can be mounted on the turnstile itself, so it opens the lane and records the student in one movement, or installed beside the entrance, separate from the gate. The first option is more accurate because no student enters without being recorded. This is how the verification methods compare in a school:
| Verification method | Advantages in a school | Drawbacks |
|---|---|---|
| Face recognition | Fast at peak, touch-free, cannot be lent or lost | Needs initial enrolment for every student and updates as students grow; face data is sensitive |
| Card (RFID) | Lower cost, quick enrolment | Gets lost and forgotten, and a student can pass a friend’s card |
| Fingerprint | Accurate and familiar to schools | Slower at peak and means hundreds of students touching the reader every day |
Most schools end up with face recognition for students and card or face for teachers and staff. The ZKTeco and Hikvision attendance terminals available from AZEIDK support face, card and fingerprint depending on the model; see the time attendance range, and for device setup and log retrieval see the ZKTeco brand page.
Face and fingerprint data are not ordinary data. Saudi Arabia’s Personal Data Protection Law classifies biometric data that identifies a person as sensitive data, and most students are minors. We therefore design the system so templates stay on the school’s own terminal or server, with limited viewing rights, and a student’s data is deleted when they transfer or graduate. The decision to collect this data and how parents are informed rests with the school management under the regulations that apply to it.
Organising dismissal and handover to parents
Dismissal is the hardest moment of the school day. The gates record each student leaving, but handover needs organisation around the gate:
- Separate routes: one route for school transport students straight to the buses, one for students waiting for a parent inside an enclosed waiting area, and one for visitors through reception.
- Staggered dismissal: releasing stages in batches cuts pressure on the lanes instead of adding more of them.
- A parents’ entrance: if the school lets parents come in to collect a child, they enter through a separate route with a visitor record, not through the student gate.
- Cameras: a camera on every gate and on the drop-off area to read number plates at peak. Details in our CCTV installation guide.
University entrance gates
A university is not a large school. It has outer perimeter gates for vehicles and pedestrians, then building and faculty entrances, then restricted areas such as laboratories, server rooms and student housing. The right design is layered: barrier gates and full height turnstiles on the perimeter, tripod or speed gates at faculty entrances, and access control readers on the doors of restricted areas.
All of these devices run on the university network and are managed from central software, so permissions for every student and staff member are granted and revoked in one place. University gates therefore need early coordination with the network team on data points, power and cable routes, as part of network and communication systems.
Gates and emergency exits
A turnstile stops unauthorised passage, and that is exactly what makes it an obstacle during evacuation. We apply three rules in every school:
- Turnstiles are not counted as emergency exits, and a side emergency door or a wide lane opening in the direction of exit is left beside them.
- Turnstiles and access control devices are linked to the fire alarm panel so they open or release automatically on alarm.
- This function is tested at handover and again during evacuation drills.
The number and width of exits are set by the designer under the Saudi Building Code and Civil Defense requirements for each building, and the gates are placed so they do not reduce them.
School gate project steps
- Survey the entrances, measure their width, and collect student numbers per stage with entry and dismissal times.
- Design the routes, the number of lanes and the gate type for each entrance.
- Choose the verification method for students, teachers and visitors.
- Install, then carry out programming and systems integration: link gates to the attendance terminals, the software and the fire alarm.
- Enrol students, test under a real peak and hand over operating procedures to the school team.
Frequently asked questions
What is the best turnstile for a school?
There is no single type. Tripod turnstiles suit intermediate and secondary students, speed gates suit large main entrances, and young children need a supervised entrance.
How do you work out how many school gates are needed?
From the number of students passing during the dismissal peak and how long that peak lasts, divided by the throughput of one lane as stated in the datasheet of the chosen model.
Can student attendance be linked to the turnstile?
Yes. The reader is mounted on the turnstile, the lane opens only after the student is recorded, and the log is transferred to the attendance software.
Is face recognition attendance safe for student data?
It is when the data stays on the school’s server with limited access, is deleted when a student leaves, and the school complies with the Personal Data Protection Law.
What happens to the gates when the fire alarm sounds?
If they are linked to the alarm panel, they open or release automatically. Even so, turnstiles do not count as an emergency exit, and an emergency door is needed beside them.
Are university entrance gates different from school gates?
Yes. A university needs layers: perimeter gates, faculty entrance gates and access control for restricted areas, all managed centrally over the network.
Conclusion
Design school gates from the dismissal peak and the students’ ages, not from a turnstile catalog. Choose the type for each entrance, tie attendance to the gate, separate the routes for transport, parents and visitors, handle student biometric data with care, and always leave an emergency door beside the gates with release linked to the fire alarm.
Need turnstiles and student attendance for a school or university? The AZEIDK team surveys the entrances, designs the routes, and supplies, installs and programs the gates and attendance terminals. Talk to the AZEIDK team
Related guides
- EZVIZ Cameras for Shops and Homes: Models and Applications
- Prequalification Fire Contractor File: What Owners and Main Contractors Ask For
- Electric Fire Pump Maintenance: Weekly, Monthly and Annual Checks
- CCTV Camera Price in Saudi Arabia (KSA): What Drives CCTV System Cost for Facilities and How to Compare Installation Quotes







