Request a Quote

AZEIDK Solutions

Integrated Engineering Solutions for Safer Facilities

Fire protection, low current systems, and electromechanical solutions.

Explore All Solutions →

Fire Protection & Life Safety

Fire Alarm SystemsAddressable and conventional detection and alarm Fire Fighting SystemsSprinkler networks, fire pumps and components Special Fire Suppression SystemsGas and aerosol systems for sensitive equipment Kitchen Fire Suppression SystemsHood and cooking equipment protection Smoke Extraction & Emergency VentilationSmoke control to keep escape routes usable Fire-Rated Doors & Emergency ExitsFire-rated doors and exit hardware

Low Current Systems

Integrated Low Current SystemsIntegrated security, surveillance, networks and communications Security & Surveillance SystemsCCTV, access control and intercom Network & Communication SystemsStructured cabling, networks and IP telephony

Electromechanical & Contracting

HVAC, Electrical & Plumbing WorksElectromechanical (MEP) works coordinated with fire protection and low current systems Smart Buildings & Systems IntegrationNetworks, CCTV, access control, fire alarm and BMS working as one General ContractingProject delivery and trade coordination, with life safety built in from day one

Engineering delivery process

Regulatory & compliance support

Fire Alarm Systems

Addressable and conventional fire alarm systems, designed, installed and tested by AZEIDK

Fire alarm products Project: Al Andalus Business Center

Explore Fire Alarm Systems →

Need the right engineering solution?

Talk to the AZEIDK Team

Request a Quote

Public Address & Audio

ZYCOO Network Power Amplifier (SD260 / SD2140)

The SD Series are 1U Class-D network power amplifiers that receive SIP paging and network audio and drive 100 V/70 V line or low-impedance speakers.

Brand

ZYCOO

Product Details

Product Overview

The SD Series are 1U Class-D network power amplifiers that receive SIP paging and network audio and drive 100 V/70 V line or low-impedance speakers. Each model offers two channels or one bridged channel, plus balanced, RCA and Bluetooth inputs. The SD260 is the 2 x 60 W model and the SD2140 the 2 x 140 W model.

Model	SD260 / SD2140
Variants	SD260: 2 × 60W (SE) or 1 × 120W (BTL); SD2140: 2 × 140W (SE) or 1 × 280W (BTL)
Amplifier Topology	Class-D
Frequency Response	20Hz～20KHz ± 0.25dB
SNR	85dB
SD2140 Output Power, SE	@ 100V 2 x 140W; @ 25V 2 x 140W; @ 4Ω (Min) 2 x 140W
SD2140 Output Power, BTL	@ 100V Bridge 1 x 280W; @ 70V Bridge 1 x 280W; @ 25V Bridge 1 x 280W; @ 8Ω (Min) Bridge 1 x 280W
Audio Input Connectors	Balanced: 2 x 3-Pin Phoenix Connectors; Unbalanced: 2 x RCA Jacks; Bluetooth: 1 x IPX1 External 2.4G Antenna (BT 5.3 Compatible); Network: 1 x RJ45 Connector
SIP Audio Codecs	G.722, G.711 A-law, G.711 U-law, Opus
Dante	Supported
Power Input Voltage	100～240VAC 50/60Hz
Chassis	Metal, Black, 1U Standard Chassis
SD2140 Dimensions / Weight	17.32" x 6.69" x 1.73" (440mm x 170mm x 44mm) / 2.75kg

Values marked by series are taken from the official ZYCOO series datasheet.

Typical applications

Driving 100 V line ceiling and horn speaker zones from an IP PA system
Upgrading legacy analog PA in malls, mosques and halls
Background music for hotels and restaurants

Source: ZYCOO official product page and official datasheet. Supplied in Saudi Arabia by AZEIDK with installation and technical support.

Technical Documents

Product Catalogue

View the product’s full specifications and technical information in the official catalogue.

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.