DSPPA MAG6701 IP Network Terminal with Built-in Amplifier

The MAG6701 is an IP audio terminal for the MAG6000 system that receives network audio and drives local 100 V speakers through a built-in 60 W amplifier.
Brand
DSPPA MAG6701 IP Network Terminal with Built-in Amplifier

Product Details

Product Overview

The MAG6701 is an IP audio terminal for the MAG6000 system that receives network audio and drives local 100 V speakers through a built-in 60 W amplifier. It has local USB/SD playback, microphone and auxiliary inputs, and can run timed programmes without the host.

Model MAG6701
Built-in amplifier Max output power 60 W / 160 Ω (single-channel mode)
Max harmonic distortion ≤1%
AUX IN sensitivity 300 mV ±30 mV
MIC input sensitivity 3.5 mV ±1 mV
Frequency response (AUX IN) 80 Hz-16 kHz (±3 dB)
Signal-to-noise ratio ≥77 dB
Max external USB drive 32 GB
100 V backup conversion time 220 ms (±50 ms)
Power supply AC 220 V / 50 Hz
Unit dimensions (L x W x H) 222 x 195 x 56 mm
Net weight 2.35 kg

Typical applications

  • Classroom and floor zones on an IP PA network
  • Remote buildings on the same LAN
  • Meeting rooms needing local inputs
  • Zones that need emergency paging from a central host

Source: DSPPA official product page and official datasheet. Supplied in Saudi Arabia by AZEIDK with installation and technical support.

Technical Documents

Product Catalogue

View the product’s full specifications and technical information in the official catalogue.

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.