WATEX WE Series End Suction Fire Pump – UL Listed and FM Approved

WATEX WE Series end suction fire pump, UL listed and FM approved according to the manufacturer’s certificates.

A horizontal single-stage volute-casing centrifugal pump with the discharge perpendicular to the suction, designed to NFPA 20, driven by an electric motor or diesel engine, and suited to sites where space is limited.

Approvals (per the manufacturer):

• UL: UL certificate EX27019 for end suction fire pumps, covering models WE 50-260, WE 50-315, WE 65-250, WE 65-260, WE 65-315, WE 80-250, WE 80-260, WE 80-315, WE 100-260, WE 100-315 and WE 125-315.
• FM: FM Approvals Class 1319 (PR464696), covering models WE 50-260, WE 65-260, WE 80-250, WE 80-260, WE 100-260 and WE 100-315, with rated capacities from 50 to 1000 gpm depending on the model.

General specifications (per the manufacturer’s catalogue):

• Rated flow: 25 to 1000 gpm.
• Maximum working pressure: up to 530 psi.
• Speed: 2620 to 3000 rpm.
• Driver: electric motor or diesel engine.
• Each pump is hydrostatically tested at no less than 1.5 times the maximum working pressure for at least 5 minutes.

Certificates and datasheet:

• UL certificate
• FM approval
• The WATEX catalogue can be downloaded from this page.

Available from AZEIDK in Saudi Arabia. Send the required flow, pressure and driver type, plus any special requirements, and we will select the model and send a quotation with the datasheet. Anything not in stock, AZEIDK can source on request.

The complete WATEX guide (approved models, capacity of each model, catalogues): read the guide