Request a Quote

AZEIDK Solutions

Integrated Engineering Solutions for Safer Facilities

Fire protection, low current systems, and electromechanical solutions.

Explore All Solutions →

Fire Protection & Life Safety

Fire Alarm SystemsAddressable and conventional detection and alarm Fire Fighting SystemsSprinkler networks, fire pumps and components Special Fire Suppression SystemsGas and aerosol systems for sensitive equipment Kitchen Fire Suppression SystemsHood and cooking equipment protection Smoke Extraction & Emergency VentilationSmoke control to keep escape routes usable Fire-Rated Doors & Emergency ExitsFire-rated doors and exit hardware

Low Current Systems

Integrated Low Current SystemsIntegrated security, surveillance, networks and communications Security & Surveillance SystemsCCTV, access control and intercom Network & Communication SystemsStructured cabling, networks and IP telephony

Electromechanical & Contracting

HVAC, Electrical & Plumbing WorksElectromechanical (MEP) works coordinated with fire protection and low current systems Smart Buildings & Systems IntegrationNetworks, CCTV, access control, fire alarm and BMS working as one General ContractingProject delivery and trade coordination, with life safety built in from day one

Engineering delivery process

Regulatory & compliance support

Fire Alarm Systems

Addressable and conventional fire alarm systems, designed, installed and tested by AZEIDK

Fire alarm products Project: Al Andalus Business Center

Explore Fire Alarm Systems →

Need the right engineering solution?

Talk to the AZEIDK Team

Request a Quote

Intrusion Alarm Systems, Security systems

Hikvision DS-PM1-O1H-WE Wireless Output Expander (High Power)

Wireless wall switch (relay module) for the AX PRO system that connects to a 100–240 VAC supply and switches a single relay output. It communicates with the panel over two-way 868 MHz radio. It can be triggered by alarm, schedule, fault or manual scenarios.

Brand

Hikvision

Product Details

Product Overview

Wireless wall switch (relay module) for the AX PRO system that connects to a 100–240 VAC supply and switches a single relay output. It communicates with the panel over two-way 868 MHz radio. It can be triggered by alarm, schedule, fault or manual scenarios.

Model	DS-PM1-O1H-WE
Relay output	1 channel, NO/NC, 100–240 VAC, max. 13 A
Voltage protection	Supported; cuts off at ≤90 V or ≥264 V
Scenario settings	Alarm, operation, fault, schedule, manual
RF frequency	868 MHz
RF method	Two-way communication
RF distance	1600 m
Power supply	100–240 VAC, 50/60 Hz
LED status	3: register/signal (green/red), power (green), relay status (blue)
Operating temperature	-10 °C to +55 °C
Operating humidity	10% to 90%
Dimensions (W × H × D)	38 × 25 × 18 mm
Installation method	Wall mounting or inside an 86 box

Source: Hikvision official product page / datasheet. Supplied in Saudi Arabia by AZEIDK with installation and technical support.

Technical Documents

Product Catalogue

View the product’s full specifications and technical information in the official catalogue.

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.