Request a Quote

AZEIDK Solutions

Integrated Engineering Solutions for Safer Facilities

Fire protection, low current systems, and electromechanical solutions.

Explore All Solutions →

Fire Protection & Life Safety

Fire Alarm SystemsAddressable and conventional detection and alarm Fire Fighting SystemsSprinkler networks, fire pumps and components Special Fire Suppression SystemsGas and aerosol systems for sensitive equipment Kitchen Fire Suppression SystemsHood and cooking equipment protection Smoke Extraction & Emergency VentilationSmoke control to keep escape routes usable Fire-Rated Doors & Emergency ExitsFire-rated doors and exit hardware

Low Current Systems

Integrated Low Current SystemsIntegrated security, surveillance, networks and communications Security & Surveillance SystemsCCTV, access control and intercom Network & Communication SystemsStructured cabling, networks and IP telephony

Electromechanical & Contracting

HVAC, Electrical & Plumbing WorksElectromechanical (MEP) works coordinated with fire protection and low current systems Smart Buildings & Systems IntegrationNetworks, CCTV, access control, fire alarm and BMS working as one General ContractingProject delivery and trade coordination, with life safety built in from day one

Engineering delivery process

Regulatory & compliance support

Fire Alarm Systems

Addressable and conventional fire alarm systems, designed, installed and tested by AZEIDK

Fire alarm products Project: Al Andalus Business Center

Explore Fire Alarm Systems →

Need the right engineering solution?

Talk to the AZEIDK Team

Request a Quote

Pipe Fittings & Installation Accessories

Giacomini R206A Pressure independent control valve (PICV)

Pressure independent control valve that holds a preset flow rate constant while differential pressure in the circuit changes.

Brand

Giacomini

Product Details

Product Overview

Pressure independent control valve that holds a preset flow rate constant while differential pressure in the circuit changes. With a proportional actuator it modulates flow to the terminal load; without one, or with an on/off actuator, it works as a flow limiter and shut-off. Pressure ports allow differential pressure to be measured on site.

Model	R206A
Temperature range	5 to 120 °C
Max. working pressure	25 bar (2.5 MPa)
Differential pressure range with R473 actuator	25 to 400 kPa
Differential pressure range with K281 or no actuator	25 to 800 kPa
Flow control accuracy	±10% on controlled flow value
Actuator connection	M30 x 1.5 mm
Body material	DZR brass
Sizes	G 1/2" M (DN15) to G 2" M (DN50)
Flow range	32 l/h (R206AY113) to 14000 l/h (R206AY107/108)
Compatible actuators	K281X062 0-10 V 24 V; R473X221 230 V; R473X222 24 V

Typical applications

Fan coil units and AHU coils in chilled water systems
Hydronic balancing in offices, hotels and hospitals
Flow limiting on branch circuits

Source: Giacomini official product page and official datasheet. Supplied in Saudi Arabia by AZEIDK with installation and technical support.

Technical Documents

Product Catalogue

View the product’s full specifications and technical information in the official catalogue.

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.