Belden 7965E Category 6 U/UTP Cable, 4 Pair 23 AWG, PVC CPR Eca

Belden 7965E is a Category 6 premise horizontal cable rated to 250 MHz with four pairs of 23 AWG solid bare copper, polyethylene insulation, the patented X-Spline centre member and a PVC jacket classed CPR Eca. It supports Gigabit Ethernet and Category 5e/6 applications for horizontal and backbone cabling.

Key features

• Category 6, 250 MHz, U/UTP
• 4 pairs 23 AWG solid bare copper
• Patented X-Spline centre member
• PVC jacket, CPR Eca, indoor

Technical specifications

• Applications: 1000Base-T, 100Base-T, 10Base-T
• Insulation: PE, 0.96 mm nominal diameter

Typical applications

Office and campus LAN cabling, CCTV IP camera runs, access control and IP intercom networks.

Selection notes

Before ordering, confirm the conductor size against circuit length and voltage drop, the wiring requirements of the panel or device manufacturer, and the cable rating called for in the project specification and Civil Defense approval. AZEIDK engineers can review your cable schedule and riser diagrams and match each circuit with the right cable from the range we supply.

Supply and support from AZEIDK

AZEIDK supplies the Belden 7965E in Saudi Arabia with technical selection, submittal preparation, installation, testing and commissioning, and maintenance through its engineering team, showrooms and warehouses in Jeddah, Riyadh and Dammam. The manufacturer datasheet is available for download on this page. Send your drawings, BOQ or specification to receive a technical and commercial offer, with technical follow-up from our team during execution and after handover.