Request a Quote

AZEIDK Solutions

Integrated Engineering Solutions for Safer Facilities

Fire protection, low current systems, and electromechanical solutions.

Explore All Solutions →

Fire Protection & Life Safety

Fire Alarm SystemsAddressable and conventional detection and alarm Fire Fighting SystemsSprinkler networks, fire pumps and components Special Fire Suppression SystemsGas and aerosol systems for sensitive equipment Kitchen Fire Suppression SystemsHood and cooking equipment protection Smoke Extraction & Emergency VentilationSmoke control to keep escape routes usable Fire-Rated Doors & Emergency ExitsFire-rated doors and exit hardware

Low Current Systems

Integrated Low Current SystemsIntegrated security, surveillance, networks and communications Security & Surveillance SystemsCCTV, access control and intercom Network & Communication SystemsStructured cabling, networks and IP telephony

Electromechanical & Contracting

HVAC, Electrical & Plumbing WorksElectromechanical (MEP) works coordinated with fire protection and low current systems Smart Buildings & Systems IntegrationNetworks, CCTV, access control, fire alarm and BMS working as one General ContractingProject delivery and trade coordination, with life safety built in from day one

Engineering delivery process

Regulatory & compliance support

Fire Alarm Systems

Addressable and conventional fire alarm systems, designed, installed and tested by AZEIDK

Fire alarm products Project: Al Andalus Business Center

Explore Fire Alarm Systems →

Need the right engineering solution?

Talk to the AZEIDK Team

Request a Quote

Access Control, Security systems

Dahua ASI1202M ASI1202M-D Access Controller

Legacy model (discontinued by Dahua): The ASI1202M / ASI1202M-D is an all-in-one fingerprint and card access controller in a zinc-alloy housing rated IP65 and IK10. It supports RS-485 and Wiegand peripheral readers and stores up to 3,000 fingerprints and 30,000 cards.

Brand

Dahua

Product Details

Product Overview

The ASI1202M / ASI1202M-D is an all-in-one fingerprint and card access controller in a zinc-alloy housing rated IP65 and IK10. It supports RS-485 and Wiegand peripheral readers and stores up to 3,000 fingerprints and 30,000 cards.

Legacy model: Dahua has discontinued this model, and it is listed under Discontinued Products on Dahua’s official site. The specifications below are for reference and for existing installations; on request we recommend the current equivalent Dahua model.

Model	ASI1202M / ASI1202M-D
Appearance	All-in-one, zinc alloy
Unlock Modes	Card, fingerprint, card & fingerprint
Card Reading	13.56 MHz IC card; reading distance 1–3 cm
User Capacity	30,000
Card Capacity	30,000
Fingerprint Capacity	3,000
Record Capacity	150,000
Network	1 × RJ-45, 10/100 Mbps
Peripheral Interfaces	1 RS-485, 1 Wiegand, 1 USB 2.0
Power Supply	12V DC 1A
Protection	IP65, IK10
Operating Temperature	-30°C to +50°C

Source: Dahua official product page.

Technical Documents

Product Catalogue

View the product’s full specifications and technical information in the official catalogue.

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.