Safe Guard 6% Aqueous Film Forming Foam – 20 L

SAFEGUARD BIOSOLV C6 AFFF-6% in a 20-liter container is an aqueous film-forming foam concentrate designed to extinguish and secure fires involving non-polar hydrocarbon fuels.

The concentrate is proportioned at 6%, using six parts foam concentrate with 94 parts fresh water or seawater through properly calibrated proportioning equipment.

The foam forms a thin aqueous film over the fuel surface to suppress flammable vapors. A stable foam blanket separates the fuel from oxygen, while water released from the foam bubbles cools the surface and helps prevent re-ignition.

The product is supplied in a 20-liter HDPE container and is suitable for low- and medium-expansion discharge equipment and conventional fixed or portable proportioning systems.

Key Features:

• Aqueous Film Forming Foam concentrate.
• 6% proportioning ratio.
• 20-liter package.
• SAFEGUARD BIOSOLV C6 product.
• Intended for non-polar hydrocarbon fuel fires.
• Suitable for Class B hydrocarbon fires.
• Suitable for selected Class A applications.
• Compatible with fresh water and seawater.
• Formulated with C6 fluorosurfactants.
• Stated as free from PFOA and PFOS.
• Described as non-toxic, non-hazardous and biodegradable.
• Fast fire knockdown.
• Burn-back resistance.
• Post-fire security.
• Compatible with dry chemical powder extinguishing agents.
• Suitable for low- and medium-expansion discharge devices.
• UL Listed.
• Conforms to ICAO Level-C according to the data sheet.

How AFFF Works:

Aqueous Film:

The foam spreads across the fuel surface and forms a thin aqueous film that suppresses flammable vapors.

Foam Blanket:

The stable foam blanket separates the fuel surface from oxygen and helps prevent re-ignition.

Cooling Effect:

Water released from the foam bubbles cools the fuel surface and reduces the energy required for continued burning.

Proportioning Ratio:

• 6 parts foam concentrate.
• 94 parts water.
• Fresh water or seawater.
• Use properly calibrated proportioning equipment.

Typical Properties:

Appearance:

• Amber color.

pH:

• 6 to 8.5.

Viscosity:

• 200 cSt maximum.

Specific Gravity:

• 1.02 ± 0.02.

Sludge Content:

• 0.5% maximum.

Expansion:

• 6 to 10.

25% Drainage Time:

• Greater than 90 seconds.

Film Forming Test:

• Greater than zero according to the data sheet.

Fire Performance According to UL 162:2018:

• Fire extinction: ≤ 3 minutes.
• Torch test: Passes.
• Burn-back resistance: ≥ 5 minutes.

Fire Performance According to ICAO Level-C:

• Fire extinction: ≤ 1 minute.
• Burn-back resistance: ≥ 5 minutes.

Applications:

• Crude oil.
• Petrol.
• Diesel.
• Kerosene.
• Heptane.
• Other non-polar hydrocarbon fuels.
• Wood.
• Paper.
• Selected plastics.

Typical Areas of Application:

• Fuel storage tanks.
• Process areas.
• Power stations.
• Fuel warehouses.
• Fuel stations.
• Petrochemical facilities.
• Marine terminals.
• Offshore platforms.
• Hydrocarbon storage and transport areas.
• Airport and aviation-fuel facilities according to approved design.
• Facilities handling flammable liquids.

Compatible Proportioning Equipment:

• Balanced pressure pump proportioners.
• In-line balanced pressure proportioners.
• Bladder tanks with ratio flow controllers.
• Around-the-pump proportioners.
• Fixed in-line venturi proportioners.
• Portable in-line venturi proportioners.
• Hand-line nozzles with fixed eductors or pick-up tubes.

Instructions for Use:

• Do not use on energized electrical fires.
• Do not use on chemicals that react dangerously with water.
• Avoid eye and skin contact.
• Avoid ingestion.
• Use sealed safety goggles.
• Use PVC, nitrile or butyl-rubber gloves.
• Use suitable protective clothing and boots.
• Dispose of waste according to applicable regulations.
• Prevent discharge into groundwater, surface water or storm drains.

Environmental Information:

The product is described as:

• PFOA free.
• PFOS free.
• Non-toxic.
• Non-hazardous.
• Biodegradable.

Foam waste must still be handled through an authorized treatment or disposal facility.

Storage:

• Store in a dry, well-ventilated location.
• Do not expose containers directly to sunlight.
• Preferably stack containers in a single layer.
• Do not exceed two stacked layers.
• Recommended storage temperature: 0°C to 49°C.

Packaging:

• Capacity: 20 liters.
• Container: HDPE.
• Shape: Rectangular.
• Approximate length: 265 mm.
• Approximate width: 230 mm.
• Approximate height: 410 mm.

Approvals and Standards Mentioned:

• UL Listed.
• UL 162:2018.
• ICAO Level-C.

Important Notes:

Maintain the correct 6% proportioning ratio and do not use the concentrate undiluted.

Confirm compatibility with the fuel, proportioning system and discharge equipment before use.

The product is intended primarily for non-polar hydrocarbon fuels and is not automatically suitable for water-miscible polar solvents.

Refer to the attached data sheet for complete storage, handling, proportioning, testing and approval information.