{"id":25141,"date":"2026-11-14T15:19:16","date_gmt":"2026-11-14T12:19:16","guid":{"rendered":"https:\/\/azeidkgroup.com\/sa\/media-center\/"},"modified":"2026-11-14T18:12:00","modified_gmt":"2026-11-14T15:12:00","slug":"hikvision-nvr-settings-sadp-recording-schedule-hdd","status":"publish","type":"post","link":"https:\/\/azeidkgroup.com\/en\/sa\/media-center\/hikvision-nvr-settings-sadp-recording-schedule-hdd\/","title":{"rendered":"Hikvision CCTV Settings: NVR Activation, Recording Schedule, HDD and Retention"},"content":{"rendered":"\t\t<div data-elementor-type=\"wp-post\" data-elementor-id=\"25141\" class=\"elementor elementor-25141 elementor-25140 elementor-bc-flex-widget\" data-elementor-post-type=\"post\">\n\t\t\t\t<div class=\"elementor-element elementor-element-5db3ed8 e-con-full az-el-article e-flex e-con e-parent\" data-id=\"5db3ed8\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-9db2853 elementor-widget elementor-widget-text-editor\" data-id=\"9db2853\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<p class=\"az-intro\">Hikvision CCTV settings start at the recorder itself: activate it with a strong password through the SADP tool or the local screen, initialize the hard drive, set a recording schedule for every camera, and then decide how long recordings are kept. These four steps decide whether a facility owner can find the clip they need a week or a month later. This guide walks through each step using the menu paths in Hikvision&#8217;s official manuals, adds practical notes from Saudi projects, and explains when recordings may and may not be deleted.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-ac6ebd3 elementor-widget elementor-widget-text-editor\" data-id=\"ac6ebd3\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<div class=\"az-keybox\"><h2>Key takeaways<\/h2><ul>\n<li>A Hikvision NVR cannot be used before activation. The official manual requires a password of at least 8 characters using at least three of: upper case, lower case, numbers and special characters.<\/li>\n<li>Initialize the HDD from Storage &gt; Storage Device, then Init. Initialization erases all data on the disk.<\/li>\n<li>Set the recording schedule per camera from Storage &gt; Recording Schedule: continuous, motion or event recording.<\/li>\n<li>Expired Time sets how long a file stays on the HDD. A value of 0 means files are not deleted, and actual retention is limited by disk capacity.<\/li>\n<li>Facilities covered by the Saudi Law on the Use of Security Surveillance Cameras must keep recordings for a set period, so nothing should be deleted before it ends.<\/li>\n<\/ul><\/div>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-4e1e85a elementor-widget elementor-widget-text-editor\" data-id=\"4e1e85a\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<h2>What do you need before configuring a Hikvision recorder?<\/h2>\n<p>Check four things first: a hard drive installed in the recorder before recording starts (as the official manual says), a local network shared by the recorder and a PC, a PC running Hikvision&#8217;s SADP tool, and cameras connected to the recorder&#8217;s PoE ports or to a separate PoE switch.<\/p>\n<p>A practical example from the range AZEIDK lists: the <a href=\"\/en\/sa\/products\/hikvision-ds-7608nxi-k1b-8-channel-network-video-recorder-nvr\/\">Hikvision DS-7608NXI-K1\/8P (B) network video recorder<\/a>. According to the product page it supports 8 channels with 80 Mbps incoming bandwidth, one SATA bay for a disk of up to 10 TB, and 8 PoE ports with a total budget of up to 75 W. Keep these figures in mind when you calculate retention, because one disk is all the storage you have.<\/p>\n<p>On larger projects, recorder and disk selection comes before configuration. Review <a href=\"\/en\/sa\/media-center\/poe-switch-cctv-power-budget\/\">PoE switch power budgets for CCTV<\/a> before connecting cameras.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-0504049 elementor-widget elementor-widget-text-editor\" data-id=\"0504049\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<h2>How do you activate a Hikvision recorder with SADP or the local screen?<\/h2>\n<p>Hikvision&#8217;s manual is explicit: no operation is allowed before activation. There are two ways to do it.<\/p>\n<h3>Activation from the local screen<\/h3>\n<p>Connect a monitor through HDMI or VGA and power up the recorder. The activation window asks for the admin password twice. Newer units also show extra options in the same window: a Channel Default Password used to activate new cameras connected to the recorder, GUID export, and security questions.<\/p>\n<h3>Activation with the SADP tool<\/h3>\n<p>SADP is a free Hikvision utility that finds devices on the network, activates them and is also used to reset passwords. Run it on a PC in the same network. Inactive devices show the status Inactive. Select the recorder, enter and confirm the new password, then click Activate. The manual lists 192.168.1.64 as the default IPv4 address, so change the address in SADP to match the site network before anything else.<\/p>\n<p><strong>Password rules:<\/strong> at least 8 characters, combining at least three of upper case, lower case, numbers and special characters. One Hikvision manual adds that 7 wrong password attempts lock the account for 60 seconds.<\/p>\n<p>Site tip: export the GUID file to a USB stick during activation and keep it with the handover documents. It is one of the password recovery methods in the official manual. Handing a recorder to the owner without this file and without a documented password causes a recurring problem a year or two later.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-1b0004d elementor-widget elementor-widget-text-editor\" data-id=\"1b0004d\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<h2>Initializing the HDD on a Hikvision recorder<\/h2>\n<p>After activation the recorder must see the disk as ready. A new disk usually shows as Uninitialized. To initialize it:<\/p>\n<ol>\n<li>Go to Storage &gt; Storage Device.<\/li>\n<li>Select the uninitialized disk.<\/li>\n<li>Click Init and confirm.<\/li>\n<\/ol>\n<p>Hikvision&#8217;s manual warns that initialization removes all data saved on the HDD. Never run Init on a working recorder that holds footage you need until the required clips are exported.<\/p>\n<p>After that, check disk health from time to time. In DeepinMind and similar interfaces the tools sit under Maintenance &gt; HDD Operation, including S.M.A.R.T. and Bad Sector Detection. These checks belong in routine CCTV maintenance.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-58f657e elementor-widget elementor-widget-text-editor\" data-id=\"58f657e\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<h2>Setting the recording schedule in Hikvision CCTV settings<\/h2>\n<p>The recording schedule decides when each camera records. The path in the official manual is:<\/p>\n<ol>\n<li>Storage &gt; Recording Schedule.<\/li>\n<li>Select the camera and check Enable Schedule.<\/li>\n<li>Choose the Record Type.<\/li>\n<li>Select a day and drag on the time bar to set the period. Repeat for the other days.<\/li>\n<li>Click Apply.<\/li>\n<\/ol>\n<p>Menu names vary slightly with firmware, so you may see Storage &gt; Schedule Settings &gt; Record Schedule instead. Some interfaces have a Copy button to apply the same schedule to other cameras. One manual also notes that continuous recording is applied to every day by default, so review the schedule rather than assuming it is empty.<\/p>\n<div class=\"az-table-wrap\"><table>\n<thead><tr><th>Record type<\/th><th>When it records<\/th><th>Typical use<\/th><\/tr><\/thead>\n<tbody>\n<tr><td>Continuous<\/td><td>Throughout the scheduled period<\/td><td>Entrances, cash points and areas that need a complete record with no gaps<\/td><\/tr>\n<tr><td>Motion<\/td><td>When motion is detected in the image<\/td><td>Warehouses and low-traffic corridors, to save disk space<\/td><\/tr>\n<tr><td>Alarm<\/td><td>When an alarm input is triggered<\/td><td>Recorders linked to sensors or an alarm panel<\/td><\/tr>\n<tr><td>Event<\/td><td>On any event alarm enabled on the channel, including smart events such as line crossing or intrusion<\/td><td>Perimeters and outdoor entrances with AcuSense cameras<\/td><\/tr>\n<tr><td>M\/A and M&amp;A<\/td><td>Motion or alarm, or motion and alarm together<\/td><td>Sites where you want to cut irrelevant recording<\/td><\/tr>\n<\/tbody><\/table><\/div>\n<p><strong>Pre-record and post-record:<\/strong> under Advanced, set Pre-Record (seconds before the event) and Post-Record (seconds after it). If you rely on motion recording, do not leave these at zero, or the clip may start after the person has already entered the frame.<\/p>\n<p>In practice many commercial sites combine both: continuous during working hours and motion outside them. That balances a clear record against disk space.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-6e02230 elementor-widget elementor-widget-text-editor\" data-id=\"6e02230\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<h2>Retention: Expired Time, overwrite and quota<\/h2>\n<p>Retention on a Hikvision recorder is set by three settings plus disk capacity:<\/p>\n<ul>\n<li><strong>Expired Time:<\/strong> in the advanced recording settings. The manual describes it as how long a recorded file stays on the HDD before deletion. A value of 0 means files are not deleted, and actual retention depends on HDD capacity.<\/li>\n<li><strong>Overwrite:<\/strong> when enabled, the recorder keeps recording once the disk is full by deleting the oldest files. When disabled, recording stops when the disk is full. Its location differs between interfaces, so look for it in your recorder&#8217;s storage settings.<\/li>\n<li><strong>Quota:<\/strong> under Storage &gt; Storage Mode, Quota, you set a maximum record and picture capacity in GB per camera. A value of 0 lets the camera use the whole disk, and the change needs a reboot. This is useful when entrance cameras must be kept longer.<\/li>\n<\/ul>\n<p>To estimate how long a given disk lasts for your camera count, resolution and bitrate, use the <a href=\"\/en\/sa\/tools\/cctv-storage-calculator\/\">CCTV storage calculator<\/a> or read <a href=\"\/en\/sa\/media-center\/cctv-nvr-storage-bandwidth-calculation\/\">NVR storage and bandwidth calculation<\/a>.<\/p>\n<h3>What does Saudi law say about retention?<\/h3>\n<p>The Law on the Use of Security Surveillance Cameras was issued by Royal Decree No. (M\/34) dated 7\/3\/1444H, and its Implementing Regulation by Minister of Interior Decision No. (22688). The regulation refers the retention period to the Security Conditions and Requirements Document. When a security incident is reported, recordings are kept until the investigation ends or for that period, whichever is longer. Set Expired Time and capacity so actual retention is not shorter than what applies to your facility. More in <a href=\"\/en\/sa\/media-center\/cctv-security-cameras-law-obligations-saudi\/\">Saudi CCTV law obligations<\/a>.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-a0baa0a elementor-widget elementor-widget-text-editor\" data-id=\"a0baa0a\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<h2>How do you delete Hikvision CCTV recordings?<\/h2>\n<p>This is one of the most common questions. The official manuals we reviewed do not describe deleting a single selected clip from the recorder&#8217;s interface. What they describe are automatic or bulk methods:<\/p>\n<ul>\n<li><strong>Automatic deletion:<\/strong> through Expired Time, or through overwriting the oldest files when the disk is full.<\/li>\n<li><strong>HDD initialization (Init):<\/strong> erases the whole disk. It is the usual step before moving a recorder to a new site or a new owner.<\/li>\n<li><strong>Deleting a RAID array:<\/strong> on RAID-capable recorders, deleting the array under Storage &gt; RAID Setup &gt; Array deletes all data on it.<\/li>\n<\/ul>\n<p>The other way round, to protect an important clip from automatic deletion, lock it from the recording search results. The manual states that a locked file is not overwritten. Better still, export it to a USB stick or external drive straight away.<\/p>\n<p><strong>Caution:<\/strong> before deleting anything, confirm the facility is not under a legal retention period that has not yet ended, and that no report or investigation concerns those recordings. Deleting in those cases can expose the owner to liability.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-0fadd4b elementor-widget elementor-widget-text-editor\" data-id=\"0fadd4b\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<h2>Common mistakes after setting up Hikvision recorders<\/h2>\n<ul>\n<li>Date and time left unset, so recordings carry the wrong timestamp and are hard to search.<\/li>\n<li>Motion-only recording with Pre-Record at zero.<\/li>\n<li>No documented password and no GUID export at handover.<\/li>\n<li>A disk smaller than needed, so real retention falls short of what the owner must keep.<\/li>\n<li>Overwrite disabled with nobody watching, so recording stops silently once the disk is full.<\/li>\n<li>Schedules not reviewed per channel after a new camera is added.<\/li>\n<\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-7a17397 elementor-widget elementor-widget-text-editor\" data-id=\"7a17397\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<h2>How AZEIDK can help<\/h2>\n<p>AZEIDK supplies Hikvision recorders and cameras as part of its <a href=\"\/en\/sa\/solutions\/security-surveillance-systems\/\">security and surveillance solutions<\/a>. Browse the brand&#8217;s products on the <a href=\"\/en\/brand\/hikvision\/\">Hikvision page<\/a>. Our team handles <a href=\"\/en\/sa\/services\/installation-implementation\/\">installation<\/a> and <a href=\"\/en\/sa\/services\/programming-systems-integration\/\">programming and systems integration<\/a>, including recording schedules, retention settings and documented passwords and recovery files at handover.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-d2c55a0 elementor-widget elementor-widget-text-editor\" data-id=\"d2c55a0\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<h2>Frequently asked questions<\/h2>\n<div class=\"az-faq\">\n<details class=\"az-faq__item\"><summary><h3>What are the basic Hikvision CCTV settings after installation?<\/h3><\/summary><p>Activate the recorder with a strong password, initialize the HDD, set the date and time, add the cameras, set a recording schedule per channel, then set Expired Time and the overwrite option to reach the retention you need.<\/p><\/details>\n<details class=\"az-faq__item\"><summary><h3>How do I activate a Hikvision NVR from a PC?<\/h3><\/summary><p>Run SADP on a PC in the same network, select the recorder showing Inactive, enter and confirm a new password, click Activate, then change the IP address to match your network.<\/p><\/details>\n<details class=\"az-faq__item\"><summary><h3>Can I delete one camera&#8217;s recording or a specific clip?<\/h3><\/summary><p>The official manuals we reviewed do not describe deleting a selected clip from the recorder. Deletion happens automatically through Expired Time or overwrite, or completely through HDD initialization.<\/p><\/details>\n<details class=\"az-faq__item\"><summary><h3>Does initializing the HDD erase all recordings?<\/h3><\/summary><p>Yes. Hikvision&#8217;s manual warns that initialization removes all data on the disk, so export important clips first.<\/p><\/details>\n<details class=\"az-faq__item\"><summary><h3>How many days will the recorder keep footage?<\/h3><\/summary><p>It depends on disk capacity, camera count, resolution, record type and Expired Time. Use the storage calculator to estimate it, and make sure it is not shorter than the legal period for your facility.<\/p><\/details>\n<details class=\"az-faq__item\"><summary><h3>Why did recording stop when the disk filled up?<\/h3><\/summary><p>Usually because Overwrite is disabled. With it disabled, recording stops when the disk is full. With it enabled, the oldest files are deleted automatically.<\/p><\/details>\n<\/div>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-27c8d42 elementor-widget elementor-widget-text-editor\" data-id=\"27c8d42\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<h2>Conclusion<\/h2>\n<p>A good recorder is not enough on its own. Correct activation with saved recovery files, an initialized disk, a schedule that fits each camera, and retention sized to capacity and the law are what make footage available when it is needed. Before deleting any recordings, check your facility&#8217;s legal obligations.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-ab9ad9f elementor-widget elementor-widget-text-editor\" data-id=\"ab9ad9f\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<p>If the camera shows as Inactive in SADP, start with <a href=\"https:\/\/azeidkgroup.com\/en\/sa\/media-center\/hikvision-camera-activation-sadp\/\">Hikvision camera activation with SADP<\/a>.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-f8ca92a elementor-widget elementor-widget-text-editor\" data-id=\"f8ca92a\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<p class=\"az-cta\"><strong>Need your Hikvision recorders set up properly?<\/strong> AZEIDK reviews the current settings, configures recording and retention and hands over full documentation. <a href=\"\/en\/sa\/contact\/\">Talk to the AZEIDK team<\/a><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-5494d35 elementor-widget elementor-widget-text-editor\" data-id=\"5494d35\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<div class=\"az-source\"><strong>References:<\/strong> <a href=\"https:\/\/us-legacy.hikvision.com\/en\/system\/files_force\/manual\/um_ds-76xxnxi-i2xp4s_052419na_0.pdf?download=1\" rel=\"nofollow noopener\" target=\"_blank\">Hikvision, Network Video Recorder User Manual (DS-76xxNXI-I2\/xP\/4S)<\/a>, <a href=\"https:\/\/us-legacy.hikvision.com\/en\/system\/files_force\/manual\/user_manual_of_deepinmind_nvr_v4.40.700_20210302.pdf?download=1\" rel=\"nofollow noopener\" target=\"_blank\">Hikvision, User Manual of DeepinMind Series Network Video Recorder V4.40.700<\/a>, <a href=\"https:\/\/uqn.gov.sa\/details?p=20293\" rel=\"nofollow noopener\" target=\"_blank\">Umm Al-Qura: Law on the Use of Security Surveillance Cameras (M\/34)<\/a> (in Arabic), <a href=\"https:\/\/uqn.gov.sa\/details?p=23050\" rel=\"nofollow noopener\" target=\"_blank\">Umm Al-Qura: Implementing Regulation<\/a> (in Arabic), <a href=\"\/en\/sa\/products\/hikvision-ds-7608nxi-k1b-8-channel-network-video-recorder-nvr\/\">AZEIDK: Hikvision DS-7608NXI-K1\/8P (B) product page<\/a>.<\/div>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t","protected":false},"excerpt":{"rendered":"<p>Hikvision CCTV settings step by step: NVR activation with SADP, HDD initialization, recording schedule, Expired Time retention and when to delete recordings.<\/p>\n","protected":false},"author":0,"featured_media":24921,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[221,323,322],"tags":[],"azeidk_region":[223],"class_list":["post-25141","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-azeidk-articles","category-systems-guides-en","category-systems-guides-ar"],"acf":[],"_links":{"self":[{"href":"https:\/\/azeidkgroup.com\/en\/wp-json\/wp\/v2\/posts\/25141","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/azeidkgroup.com\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/azeidkgroup.com\/en\/wp-json\/wp\/v2\/types\/post"}],"replies":[{"embeddable":true,"href":"https:\/\/azeidkgroup.com\/en\/wp-json\/wp\/v2\/comments?post=25141"}],"version-history":[{"count":2,"href":"https:\/\/azeidkgroup.com\/en\/wp-json\/wp\/v2\/posts\/25141\/revisions"}],"predecessor-version":[{"id":26292,"href":"https:\/\/azeidkgroup.com\/en\/wp-json\/wp\/v2\/posts\/25141\/revisions\/26292"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/azeidkgroup.com\/en\/wp-json\/wp\/v2\/media\/24921"}],"wp:attachment":[{"href":"https:\/\/azeidkgroup.com\/en\/wp-json\/wp\/v2\/media?parent=25141"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/azeidkgroup.com\/en\/wp-json\/wp\/v2\/categories?post=25141"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/azeidkgroup.com\/en\/wp-json\/wp\/v2\/tags?post=25141"},{"taxonomy":"azeidk_region","embeddable":true,"href":"https:\/\/azeidkgroup.com\/en\/wp-json\/wp\/v2\/azeidk_region?post=25141"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}