{"id":25129,"date":"2026-11-14T15:07:40","date_gmt":"2026-11-14T12:07:40","guid":{"rendered":"https:\/\/azeidkgroup.com\/sa\/media-center\/"},"modified":"2026-11-14T15:07:42","modified_gmt":"2026-11-14T12:07:42","slug":"fire-systems-maintenance-contract-factories","status":"publish","type":"post","link":"https:\/\/azeidkgroup.com\/en\/sa\/media-center\/fire-systems-maintenance-contract-factories\/","title":{"rendered":"Factory Fire Systems Maintenance Contract: Shutdown Windows, Foam and Pump Testing, Impairments"},"content":{"rendered":"\t\t<div data-elementor-type=\"wp-post\" data-elementor-id=\"25129\" class=\"elementor elementor-25129 elementor-25128 elementor-bc-flex-widget\" data-elementor-post-type=\"post\">\n\t\t\t\t<div class=\"elementor-element elementor-element-f9fa01f e-con-full az-el-article e-flex e-con e-parent\" data-id=\"f9fa01f\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-e780b00 elementor-widget elementor-widget-text-editor\" data-id=\"e780b00\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<p class=\"az-intro\">A factory fire systems maintenance contract sets out which fire systems are inspected and tested, how often, when tests that need a system or production shutdown are scheduled, and how the plant stays protected while a system is impaired or out for repair. The main difference from residential or commercial contracts is that factories usually have foam systems, large fire pumps and hazardous areas, and every shutdown has to fit around the production schedule.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-7a16792 elementor-widget elementor-widget-text-editor\" data-id=\"7a16792\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<div class=\"az-keybox\"><h2>Key takeaways<\/h2><ul>\n<li>The contract covers fire systems only: fire alarm, sprinklers and piping, fire pumps, foam, hose cabinets, extinguishers and any special suppression systems.<\/li>\n<li>Inspection and test frequencies for water-based systems follow NFPA 25, fire alarm follows NFPA 72, plus the manufacturer&#8217;s instructions for each item.<\/li>\n<li>NFPA 25: diesel fire pumps run weekly without flow, electric pumps monthly where the standard allows, and an annual flow test.<\/li>\n<li>An annual foam concentrate test, listed in the NFPA 25 frequency table, with a sample analysed in a laboratory following the concentrate manufacturer&#8217;s procedure.<\/li>\n<li>Any fire system impairment is managed under NFPA 25 Chapter 15: a responsible coordinator, a tag on the system, notifications and alternative protection until the system is restored.<\/li>\n<\/ul><\/div>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-e6eae82 elementor-widget elementor-widget-text-editor\" data-id=\"e6eae82\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<h2>What does a factory fire systems maintenance contract cover?<\/h2>\n<p>The first clause is a list of the systems actually installed, with device quantities and locations. A contract written around a vague phrase like &#8220;safety systems maintenance&#8221; invites disputes at the first breakdown. AZEIDK provides <a href=\"\/en\/sa\/services\/annual-maintenance-contracts\/\">preventive and scheduled maintenance contracts<\/a> for fire systems, and each scope is written after a site visit and system survey. Low current systems and CCTV (together with access control, intercom and networks) have their own separate maintenance contract and are never combined with fire systems in one contract.<\/p>\n<div class=\"az-table-wrap\"><table>\n<thead><tr><th>System<\/th><th>Common technical reference<\/th><th>Typical contract scope<\/th><\/tr><\/thead>\n<tbody>\n<tr><td>Fire alarm<\/td><td>NFPA 72 and manufacturer&#8217;s instructions<\/td><td>Panel, detectors, notification devices and batteries; test of outputs to interfaced systems<\/td><\/tr>\n<tr><td>Sprinklers and piping<\/td><td>NFPA 25<\/td><td>Valves, flow and supervisory switches, main drain test, sprinklers and pipework<\/td><\/tr>\n<tr><td>Fire pumps<\/td><td>NFPA 25 and manufacturer&#8217;s instructions<\/td><td>Periodic no-flow runs, annual flow test, controllers, diesel tank and batteries<\/td><\/tr>\n<tr><td>Foam systems<\/td><td>NFPA 25 for foam-water sprinkler systems, and manufacturer&#8217;s instructions<\/td><td>Foam tank, control valves and proportioner; annual foam concentrate sample<\/td><\/tr>\n<tr><td>Hose cabinets and hydrants<\/td><td>NFPA 25 and manufacturer&#8217;s instructions<\/td><td>Hoses, valves, couplings and access<\/td><\/tr>\n<tr><td>Fire extinguishers<\/td><td>NFPA 10 and manufacturer&#8217;s instructions<\/td><td>Periodic inspection, maintenance and recharge by type<\/td><\/tr>\n<\/tbody><\/table><\/div>\n<p>If the plant has no clear record of system condition, start with a full survey through <a href=\"\/en\/sa\/services\/assessment-of-existing-systems-scope-of-work-definition\/\">assessment of existing systems and scope definition<\/a>, so the routine contract does not inherit unknown old defects.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-9856902 elementor-widget elementor-widget-text-editor\" data-id=\"9856902\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<h2>Shutdown windows: scheduling tests without stopping production<\/h2>\n<p>Some tests cannot be done with the system in its normal state. A pump flow test discharges large volumes of water, a main drain test drops system pressure for a while, a full site alarm test stops work in the halls, and some foam tests need the tank isolated or solution discharged. The contract therefore needs an agreed schedule of shutdown windows.<\/p>\n<p>In practice, tests that need a shutdown are grouped on pre-agreed days: the plant&#8217;s planned maintenance day, a lighter shift, or the annual shutdown. For each test the contract states who approves it on the plant side, which area is affected, the expected duration, and how staff and monitoring centres are told so a test alarm is not treated as real.<\/p>\n<p>A shutdown window must not become an open-ended delay. If a test cannot go ahead because of production, the reason is recorded, a near replacement date is set, and both appear in the maintenance report.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-3f00b22 elementor-widget elementor-widget-text-editor\" data-id=\"3f00b22\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<h2>Testing foam systems in factories<\/h2>\n<p>Foam systems are common in plants that store or use flammable liquids, such as solvent stores, filling areas and generator rooms. Their maintenance differs from a standard sprinkler network because of three extra elements: the foam concentrate, the storage tank and the proportioner that sets the concentrate ratio in water.<\/p>\n<p>Manufacturers such as ANSUL recommend an annual foam system inspection with sample analysis, and the NFPA 25 frequency table for foam-water sprinkler systems lists an annual foam concentrate test, since concentrate can degrade with time, heat and contamination. The laboratory returns its analysis and an assessment of whether the concentrate is still fit for use. Routine inspection also covers tank condition, concentrate level, control valves and any leaks. For bladder tanks such as the <a href=\"\/en\/sa\/products\/watex-ul-foam-bladder-tank\/\">UL-listed WATEX foam bladder tank<\/a>, the manufacturer&#8217;s instructions govern bladder checks and refilling.<\/p>\n<p>A live foam discharge test needs its own plan: where the solution goes, how it is collected, and how the tank is refilled with the same type and concentration. Mixing different foam types or concentrations without the manufacturer&#8217;s approval is a common error the contract should prohibit.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-dc777e1 elementor-widget elementor-widget-text-editor\" data-id=\"dc777e1\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<h2>Fire pump testing under the contract<\/h2>\n<p>The fire pump is the heart of the plant&#8217;s water-based protection, and any weakness only shows during a fire unless it is tested regularly. Under NFPA 25, diesel pumps run weekly without flow for at least 30 minutes and electric pumps monthly for at least 10 minutes, moving to weekly in cases the standard defines, such as vertical turbine pumps. The annual flow test runs at three points, no flow, 100% and 150% of rated capacity, and the results are compared with the certified pump curve.<\/p>\n<p>The annual flow test has the biggest site impact because water is discharged through the test header or a flow meter. A test meter such as the <a href=\"\/en\/sa\/products\/gvi-fire-pump-test-meters-fm-approved\/\">FM-approved GVI fire pump test meters<\/a> makes testing easier and cuts wasted water where installed as designed. For detailed checks see the <a href=\"\/en\/sa\/media-center\/electric-fire-pump-maintenance-checklist\/\">electric fire pump maintenance checklist<\/a> and our <a href=\"\/en\/sa\/media-center\/nfpa-25-itm-water-based-systems-guide\/\">NFPA 25 guide to inspection, testing and maintenance<\/a>.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-d7eb686 elementor-widget elementor-widget-text-editor\" data-id=\"d7eb686\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<h2>Alternative protection during impairments<\/h2>\n<p>An impairment is any condition where a fire system, or part of it, is out of service, whether planned for maintenance or caused by a fault. NFPA 25 dedicates Chapter 15 to impairments. It requires an impairment coordinator assigned by the owner, an impairment tag on the affected system, and defined steps before and during a planned impairment and after the system returns to service. In the 2020 edition, where a system is out of service for more than 10 hours in a 24-hour period, the coordinator arranges one of the following: evacuation, an approved fire watch, a temporary water supply, or an approved programme to control ignition sources and fuel loads.<\/p>\n<p>In a factory this means:<\/p>\n<ul>\n<li>Defining the unprotected area exactly and informing production, security and safety leads.<\/li>\n<li>Reducing or stopping hazardous work in the area during the impairment, such as welding, cutting and filling.<\/li>\n<li>Assigning a fire watch where needed, and placing extra extinguishers or hoses in the area.<\/li>\n<li>Notifying the alarm monitoring party and anyone else the facility&#8217;s requirements name.<\/li>\n<li>Completing the repair quickly, then testing the system, removing the tag and recording it.<\/li>\n<\/ul>\n<p>A good contract states who does what: the contractor reports, repairs and tests; the plant appoints the coordinator and applies the alternative protection. For urgent repairs between scheduled visits, AZEIDK offers <a href=\"\/en\/sa\/services\/corrective-maintenance-technical-support\/\">corrective maintenance and technical support<\/a> for fire systems.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-69b1f8c elementor-widget elementor-widget-text-editor\" data-id=\"69b1f8c\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<h2>Factory fire system maintenance and Civil Defense requirements<\/h2>\n<p>Factories in the Kingdom operate under the requirements of the General Directorate of Civil Defense and the Saudi Fire Protection Code SBC 801, and fire systems need to be in sound working order at inspection and when applying for or renewing a safety licence through the Salamah platform. Our <a href=\"\/en\/sa\/media-center\/salamah-certificate-civil-defense-guide\/\">Salamah certificate guide<\/a> explains the steps.<\/p>\n<p>What the plant needs from the contract here is documentation: dated visit reports, pump and alarm test results, a log of faults and repairs, and a record of impairments. These records belong in the fire safety log book, as covered in our article on <a href=\"\/en\/sa\/media-center\/fire-safety-log-book-records-inspection\/\">fire safety log books and inspection records<\/a>.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-a7bb8df elementor-widget elementor-widget-text-editor\" data-id=\"a7bb8df\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<h2>Clauses a factory fire systems maintenance contract should include<\/h2>\n<ul>\n<li>A list of covered systems and devices with quantities and locations.<\/li>\n<li>Inspection and test frequency for each system and its reference standard.<\/li>\n<li>A shutdown window schedule and the plant&#8217;s approval process.<\/li>\n<li>Impairment and alternative protection procedures and who is responsible for each.<\/li>\n<li>Emergency response time as agreed, and how to call out the service.<\/li>\n<li>Which spare parts and materials are included and which are charged separately, such as replacement foam concentrate.<\/li>\n<li>Report format, content and delivery timing.<\/li>\n<li>Clear exclusions, such as faults caused by changes the contractor was not told about.<\/li>\n<\/ul>\n<p>Contract cost has no fixed figure. It depends on the number and size of systems, the number of pumps, whether foam or special suppression is installed, visit frequency, required response time, and whether spare parts are included.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-1fc3520 elementor-widget elementor-widget-text-editor\" data-id=\"1fc3520\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<h2>Frequently asked questions<\/h2>\n<div class=\"az-faq\">\n<details class=\"az-faq__item\"><summary><h3>How does a factory fire systems maintenance contract differ from a residential one?<\/h3><\/summary><p>Factories usually have larger pumps, foam systems and hazardous areas, and need shutdown windows coordinated with production and stricter impairment procedures. The scope and test schedule are more detailed as a result.<\/p><\/details>\n<details class=\"az-faq__item\"><summary><h3>How often is a factory fire pump tested?<\/h3><\/summary><p>Under NFPA 25, diesel pumps run weekly without flow and electric pumps monthly in most cases, with an annual flow test. Manufacturer instructions and project specifications may add requirements.<\/p><\/details>\n<details class=\"az-faq__item\"><summary><h3>Does foam concentrate need testing?<\/h3><\/summary><p>Yes. NFPA 25 lists an annual foam concentrate test, and manufacturers recommend laboratory analysis of a sample. Follow the concentrate manufacturer&#8217;s sampling procedure.<\/p><\/details>\n<details class=\"az-faq__item\"><summary><h3>What should I do if the sprinklers are out of service in part of the plant?<\/h3><\/summary><p>Tag the system, inform the impairment coordinator and managers, reduce hazardous work in the area, assign a fire watch where needed, then test the system after repair and record it.<\/p><\/details>\n<details class=\"az-faq__item\"><summary><h3>Does a fire systems maintenance contract include networks and CCTV?<\/h3><\/summary><p>No. A fire systems maintenance contract covers fire, safety and alarm systems only; low current, CCTV, access control and networks go under a separate maintenance contract.<\/p><\/details>\n<details class=\"az-faq__item\"><summary><h3>What drives the cost of a factory maintenance contract?<\/h3><\/summary><p>The number and size of systems, number of pumps, foam or special suppression, visit frequency, response time and whether spare parts are included.<\/p><\/details>\n<\/div>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-7bbe8ff elementor-widget elementor-widget-text-editor\" data-id=\"7bbe8ff\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<h2>Conclusion<\/h2>\n<p>A factory fire systems maintenance contract is not judged by the number of visits alone, but by three questions. Is every system in the plant listed and tested to its reference? Do tests that need a shutdown have agreed dates? Does everyone know what to do when a system is out of service? When the answers are clear in the contract and in the reports, the plant is protected in practice, not just on paper.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-aa25a90 elementor-widget elementor-widget-text-editor\" data-id=\"aa25a90\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<p class=\"az-cta\"><strong>Need a maintenance contract for your factory&#8217;s fire systems?<\/strong> Send us the list of installed systems and the plant location, and the AZEIDK team will prepare the contract scope and visit schedule. <a href=\"\/en\/sa\/contact\/\">Talk to the AZEIDK team<\/a><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-c88229f elementor-widget elementor-widget-text-editor\" data-id=\"c88229f\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<div class=\"az-source\"><strong>References:<\/strong> City of Cleveland, Fire Protection Maintenance (November 2022), citing NFPA 25 (2020), Chapter 15 (15.2.1, 15.5.2, 15.7); NFPA, Second Revisions Report for the 2026 edition of NFPA 25 (Tables 8.1.1.2 and 11.1.1.2); ANSUL, Foam Analysis.<\/div>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t","protected":false},"excerpt":{"rendered":"<p>Factory fire systems maintenance contract: what it covers, shutdown windows, foam and fire pump testing under NFPA 25, and protection during impairments.<\/p>\n","protected":false},"author":0,"featured_media":24915,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[221,323,327,322],"tags":[],"azeidk_region":[223],"class_list":["post-25129","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-azeidk-articles","category-systems-guides-en","category-by-facility-en","category-systems-guides-ar"],"acf":[],"_links":{"self":[{"href":"https:\/\/azeidkgroup.com\/en\/wp-json\/wp\/v2\/posts\/25129","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/azeidkgroup.com\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/azeidkgroup.com\/en\/wp-json\/wp\/v2\/types\/post"}],"replies":[{"embeddable":true,"href":"https:\/\/azeidkgroup.com\/en\/wp-json\/wp\/v2\/comments?post=25129"}],"version-history":[{"count":1,"href":"https:\/\/azeidkgroup.com\/en\/wp-json\/wp\/v2\/posts\/25129\/revisions"}],"predecessor-version":[{"id":25731,"href":"https:\/\/azeidkgroup.com\/en\/wp-json\/wp\/v2\/posts\/25129\/revisions\/25731"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/azeidkgroup.com\/en\/wp-json\/wp\/v2\/media\/24915"}],"wp:attachment":[{"href":"https:\/\/azeidkgroup.com\/en\/wp-json\/wp\/v2\/media?parent=25129"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/azeidkgroup.com\/en\/wp-json\/wp\/v2\/categories?post=25129"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/azeidkgroup.com\/en\/wp-json\/wp\/v2\/tags?post=25129"},{"taxonomy":"azeidk_region","embeddable":true,"href":"https:\/\/azeidkgroup.com\/en\/wp-json\/wp\/v2\/azeidk_region?post=25129"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}