{"id":25067,"date":"2026-11-13T14:28:26","date_gmt":"2026-11-13T11:28:26","guid":{"rendered":"https:\/\/azeidkgroup.com\/sa\/media-center\/"},"modified":"2026-11-13T14:52:40","modified_gmt":"2026-11-13T11:52:40","slug":"cctv-hdd-errors-hikvision-dahua-recorder-exceptions","status":"publish","type":"post","link":"https:\/\/azeidkgroup.com\/en\/sa\/media-center\/cctv-hdd-errors-hikvision-dahua-recorder-exceptions\/","title":{"rendered":"CCTV Recorder Error Messages on Hikvision and Dahua: HDD, Network, Login and Video Exceptions"},"content":{"rendered":"\t\t<div data-elementor-type=\"wp-post\" data-elementor-id=\"25067\" class=\"elementor elementor-25067 elementor-25066 elementor-bc-flex-widget\" data-elementor-post-type=\"post\">\n\t\t\t\t<div class=\"elementor-element elementor-element-22384c1 e-con-full az-el-article e-flex e-con e-parent\" data-id=\"22384c1\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-f9aaa17 elementor-widget elementor-widget-text-editor\" data-id=\"f9aaa17\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<p class=\"az-intro\">Most CCTV recorder error messages point to the hard disk, the network or the camera signal. HDD Full means the disk is full and overwrite is switched off. HDD Error means the recorder cannot read the disk or sees it as faulty. IP Conflicted means another device is using the same address, Illegal Login means someone tried a wrong password, and Video Signal Exception means one channel has lost its picture. This guide explains each message as it appears on Hikvision and Dahua recorders and what to check before you call a technician, as part of <a href=\"\/en\/sa\/solutions\/security-surveillance-systems\/\">AZEIDK security and surveillance systems<\/a>.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-2098e7c elementor-widget elementor-widget-text-editor\" data-id=\"2098e7c\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<div class=\"az-keybox\"><h2>Key takeaways<\/h2><ul>\n<li>An exception message does not always mean the recorder is faulty. Many are caused by a setting, a cable or a network address.<\/li>\n<li>HDD Full usually clears when you enable Overwrite. It rarely means the disk must be replaced.<\/li>\n<li>Initializing a disk erases every recording on it, so export important clips first.<\/li>\n<li>IP Conflicted is fixed by giving every device on the network its own address.<\/li>\n<li>Message names and menu paths differ between models and firmware versions, so check your recorder&#8217;s manual.<\/li>\n<\/ul><\/div>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-4cadbfd elementor-widget elementor-widget-text-editor\" data-id=\"4cadbfd\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<h2>Where do exception messages appear on a recorder?<\/h2>\n<p>A DVR (digital video recorder) or NVR (network video recorder) monitors itself continuously. When it detects an abnormal condition, it writes it to the log and shows a hint on the live view screen if that hint is enabled. Hikvision manuals call these conditions Exceptions. You set them in the configuration menu under Exceptions, where you pick the exception type and then how the recorder should respond.<\/p>\n<p>The response options listed in Hikvision manuals are Audible Warning, Notify Surveillance Center, Send Email and Trigger Alarm Output. Dahua recorders have a similar section called Exception in current firmware (Abnormality on older interfaces), split into tabs such as Disk, Network and Device. Each event offers actions such as Show Message, Buzzer and Send Email.<\/p>\n<p>A practical tip: enable at least an email or app alert for disk messages. Many sites only find out that recording stopped weeks ago when they need footage after an incident.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-e2e2774 elementor-widget elementor-widget-text-editor\" data-id=\"e2e2774\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<h2>CCTV recorder error messages on Hikvision and Dahua at a glance<\/h2>\n<div class=\"az-table-wrap\"><table>\n<thead><tr><th>Message<\/th><th>What it means<\/th><th>Check first<\/th><\/tr><\/thead>\n<tbody>\n<tr><td>HDD Full<\/td><td>The disk is full and the recorder is not overwriting old footage<\/td><td>The Overwrite option in storage settings<\/td><\/tr>\n<tr><td>HDD Error<\/td><td>The recorder cannot read the disk or sees it as invalid<\/td><td>Disk status in the HDD menu, cables, initialization<\/td><\/tr>\n<tr><td>No HDD (Dahua)<\/td><td>No disk is installed or the recorder does not detect it<\/td><td>Disk mounting, SATA and power cables<\/td><\/tr>\n<tr><td>Network Disconnected<\/td><td>The recorder&#8217;s network cable has lost its link<\/td><td>Network cable and the router or switch port<\/td><\/tr>\n<tr><td>IP Conflicted<\/td><td>Another device is using the same IP address<\/td><td>The router&#8217;s address list and camera addresses<\/td><\/tr>\n<tr><td>Illegal Login<\/td><td>A login attempt with a wrong username or password<\/td><td>Who tried to log in, and apps still holding an old password<\/td><\/tr>\n<tr><td>Video Signal Exception<\/td><td>Lost or faulty video signal on a channel<\/td><td>Camera cable and camera power<\/td><\/tr>\n<tr><td>Input\/Output Video Standard Mismatch<\/td><td>The video standard differs between camera, recorder or monitor<\/td><td>The video standard setting on the recorder<\/td><\/tr>\n<tr><td>Recording Exception<\/td><td>The recorder could not record one or more channels<\/td><td>Disk status and the recording schedule<\/td><\/tr>\n<\/tbody><\/table><\/div>\n<p>Names in the table follow Hikvision&#8217;s manuals, and &#8220;No HDD&#8221; comes from Dahua&#8217;s manuals. On Dahua you will see close variants such as &#8220;HDD Error&#8221;, &#8220;No Space&#8221; for a full disk, and &#8220;IP Conflict&#8221; or &#8220;MAC Conflict&#8221; for an address clash, depending on the interface version.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-758aee2 elementor-widget elementor-widget-text-editor\" data-id=\"758aee2\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<h2>Hard disk messages: HDD Full and HDD Error<\/h2>\n<h3>HDD Full: the disk is full<\/h3>\n<p>A recorder is built to run nonstop. When the disk fills up, it should delete the oldest recordings and write over them. This feature is called Overwrite. If it is switched off, recording stops when the disk is full and HDD Full appears. In most cases the fix is to enable Overwrite in the advanced storage or recording settings.<\/p>\n<p>If footage is not kept as long as the site needs, that is a capacity problem, not a fault. Work out the capacity you need from camera count, resolution and retention days with the <a href=\"\/en\/sa\/tools\/cctv-storage-calculator\/\">CCTV storage calculator<\/a>, and read how resolution and bitrate drive storage in our <a href=\"\/en\/sa\/media-center\/cctv-nvr-storage-bandwidth-calculation\/\">guide to NVR storage and bandwidth calculation<\/a>.<\/p>\n<h3>HDD Error: the recorder cannot read the disk<\/h3>\n<p>This message appears when the recorder fails to write to or read from the disk, or finds the disk in an abnormal state. Open the HDD management menu and look at the status shown for the disk. A new disk usually shows as Uninitialized and must be initialized on the recorder before it can record.<\/p>\n<p>Check in this order:<\/p>\n<ol>\n<li>Export important clips first if you can, because some fixes erase data.<\/li>\n<li>Power the recorder off and make sure the SATA data cable and the power cable are firmly seated on the disk and the board.<\/li>\n<li>Power it on and check the status. If the disk shows as Uninitialized, initialize it from the HDD menu, knowing this erases everything on it.<\/li>\n<li>If the message returns after initializing, test the disk in another recorder, or a known good disk in the same bay, to find out whether the fault is in the disk or the recorder.<\/li>\n<li>If disks keep failing, check power quality and ventilation around the recorder. Heat and power cuts both shorten disk life.<\/li>\n<\/ol>\n<p>Many current recorders include a disk health check (S.M.A.R.T.) in the maintenance menu. When you replace a disk, choose a surveillance-rated drive that appears on the recorder manufacturer&#8217;s compatibility list.<\/p>\n<h3>No HDD on Dahua<\/h3>\n<p>The recorder sees no disk at all. The usual causes are a disk that was never installed, a loose cable or a disk that has failed completely. On recorders that run without a disk on purpose, for example a unit used only for live viewing, this alert can be disabled.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-b831a28 elementor-widget elementor-widget-text-editor\" data-id=\"b831a28\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<h2>Network messages: Network Disconnected and IP Conflicted<\/h2>\n<p><strong>Network Disconnected<\/strong> means the recorder&#8217;s network port has lost its link. Check the cable and the port lights on the recorder and the switch, and try another port. If the message comes and goes, the cause is often a damaged cable or a loose RJ45 plug.<\/p>\n<p><strong>IP Conflicted<\/strong> means the IP address given to the recorder is used by another device on the same network. This is common after a new router is installed or a device with a fixed address is added. Give the recorder a static address outside the router&#8217;s DHCP range, or reserve an address for it in the router, then update the address in your viewing apps. The same thing happens when several new cameras are installed together and all arrive with the same factory default address: each camera needs its own address before they are connected together.<\/p>\n<p>On IP camera systems powered over the network, the problem may sit in the switch or its power budget, which we cover in our <a href=\"\/en\/sa\/media-center\/poe-switch-cctv-power-budget\/\">article on PoE switches and the CCTV power budget<\/a>.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-df7f950 elementor-widget elementor-widget-text-editor\" data-id=\"df7f950\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<h2>Illegal Login: a failed login attempt<\/h2>\n<p>This appears when a person or a program tries to log in with a wrong username or password. After a number of failed attempts, Hikvision and Dahua recorders lock the account for a while. The number of attempts and the lock time depend on the model and the settings.<\/p>\n<p>The most common cause is not an attack. It is usually a phone or a PC that still holds the old password after it was changed and keeps trying to log in. Update the password in every app. If the message keeps appearing from addresses you do not recognise, review which recorder ports are open to the internet, set a strong password and update the firmware from the manufacturer&#8217;s official website.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-fa91220 elementor-widget elementor-widget-text-editor\" data-id=\"fa91220\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<h2>Video Signal Exception and a lost channel picture<\/h2>\n<p>This message belongs to a specific camera channel and means the recorder is not getting a valid video signal from it. On analog DVRs, check the coax cable, the BNC connector and the camera power adapter. On NVRs, check the network cable, the PoE supply and the camera status in the camera management menu.<\/p>\n<p>A quick test is to move the camera to another channel, or connect a working camera to the same channel. If the problem follows the camera, the fault is in the camera or its cable. If it stays on the channel, the fault is in the recorder. For the differences between the two system types and their typical faults, see our <a href=\"\/en\/sa\/media-center\/ip-vs-analog-cctv\/\">IP vs analog CCTV comparison<\/a>.<\/p>\n<p><strong>Input\/Output Video Standard Mismatch<\/strong> means the video standard the recorder expects differs from what it receives or sends out. Set the video standard in the recorder settings to match the installed cameras.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-675b3cb elementor-widget elementor-widget-text-editor\" data-id=\"675b3cb\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<h2>Recording Exception: recording has stopped<\/h2>\n<p>The recorder could not save footage for one or more channels. It is often linked to the disk messages above, but it can also appear with a healthy disk if the recording schedule is not set or the cameras send more data than the recorder can take in. Check the schedule for each channel, then compare camera bitrate and resolution with the recorder&#8217;s capacity in its datasheet.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-2e9d311 elementor-widget elementor-widget-text-editor\" data-id=\"2e9d311\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<h2>When do you need a maintenance technician?<\/h2>\n<p>If HDD Error keeps returning with more than one disk, if Video Signal Exception stays after changing the cable and the camera, or if you cannot get back into the recorder after an account lock, have the system checked by a qualified technician. AZEIDK offers maintenance contracts for CCTV systems. Recorders available from AZEIDK include the <a href=\"\/en\/sa\/products\/hikvision-ds-7608nxi-k1b-8-channel-network-video-recorder-nvr\/\">Hikvision DS-7608NXI-K1B NVR<\/a> and the <a href=\"\/en\/sa\/products\/dvr-hikvision-ds-e04hqhi-b\/\">Hikvision DS-E04HQHI-B DVR<\/a>, as well as <a href=\"\/en\/brand\/dahua\/\">Dahua<\/a> products.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-85b1dd3 elementor-widget elementor-widget-text-editor\" data-id=\"85b1dd3\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<h2>Frequently asked questions<\/h2>\n<div class=\"az-faq\">\n<details class=\"az-faq__item\"><summary><h3>Why does HDD Full appear on a large disk?<\/h3><\/summary><p>Because Overwrite is switched off, so the recorder stops when the disk fills, whatever its size. Enable it in the advanced storage settings.<\/p><\/details>\n<details class=\"az-faq__item\"><summary><h3>Does initializing a CCTV HDD erase recordings?<\/h3><\/summary><p>Yes. Initializing erases everything on the disk. Export important clips to a USB drive or a PC first.<\/p><\/details>\n<details class=\"az-faq__item\"><summary><h3>Can I use any PC hard drive in a recorder?<\/h3><\/summary><p>A surveillance-rated drive is the better choice because it is designed for continuous writing. Check that it is on the recorder manufacturer&#8217;s compatibility list.<\/p><\/details>\n<details class=\"az-faq__item\"><summary><h3>What does IP Conflicted mean on a Hikvision recorder?<\/h3><\/summary><p>Another device on the network is using the same IP address. Give the recorder a unique address or reserve one for it in the router.<\/p><\/details>\n<details class=\"az-faq__item\"><summary><h3>Illegal Login keeps appearing. Has the recorder been hacked?<\/h3><\/summary><p>Not necessarily. The usual cause is an app that still holds an old password. If attempts keep coming from unknown addresses, change the password, update the firmware and review open ports.<\/p><\/details>\n<details class=\"az-faq__item\"><summary><h3>How do I know if the fault is in the camera or the recorder?<\/h3><\/summary><p>Swap channels. If the problem follows the camera, the fault is in the camera or its cable. If it stays on the same channel, the fault is in the recorder.<\/p><\/details>\n<\/div>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-142ce25 elementor-widget elementor-widget-text-editor\" data-id=\"142ce25\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<h2>Conclusion<\/h2>\n<p>Exception messages on Hikvision and Dahua recorders tell you where to start: the disk, the network, the user account or a camera channel. Check settings and cables before replacing parts, never initialize a disk before exporting what you need, and enable alerts so you do not discover a recording gap too late.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-1064ff3 elementor-widget elementor-widget-text-editor\" data-id=\"1064ff3\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<p class=\"az-cta\"><strong>Is your recorder showing repeated error messages?<\/strong> AZEIDK can inspect the system and recommend the right fix under a CCTV maintenance contract. <a href=\"\/en\/sa\/contact\/\">Talk to the AZEIDK team<\/a><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-f012946 elementor-widget elementor-widget-text-editor\" data-id=\"f012946\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<div class=\"az-source\"><strong>References:<\/strong> Hikvision DS-7316HQHI-SH recorder user manual, Handling Exceptions section (ManualOwl copy, page 108); Dahua Network Video Recorder User&#8217;s Manual V2.3.5, sections 5.10.8 Exception and 5.14.3.2 Account Lockout; Hikvision DVR user manual (ManualsLib copy, page 162, HDD status Uninitialized); Dahua NVR Pro manual (ManualsLib copy, page 103); Hikvision and Dahua product pages on azeidkgroup.com.<\/div>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t","protected":false},"excerpt":{"rendered":"<p>CCTV recorder error messages on Hikvision and Dahua: what HDD Full, HDD Error, IP Conflicted, Illegal Login and Video Signal Exception mean and what to check.<\/p>\n","protected":false},"author":0,"featured_media":24884,"comment_status":"closed","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[221,323,329,322],"tags":[],"azeidk_region":[223],"class_list":["post-25067","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-azeidk-articles","category-systems-guides-en","category-operation-maintenance-en","category-systems-guides-ar"],"acf":[],"_links":{"self":[{"href":"https:\/\/azeidkgroup.com\/en\/wp-json\/wp\/v2\/posts\/25067","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/azeidkgroup.com\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/azeidkgroup.com\/en\/wp-json\/wp\/v2\/types\/post"}],"replies":[{"embeddable":true,"href":"https:\/\/azeidkgroup.com\/en\/wp-json\/wp\/v2\/comments?post=25067"}],"version-history":[{"count":1,"href":"https:\/\/azeidkgroup.com\/en\/wp-json\/wp\/v2\/posts\/25067\/revisions"}],"predecessor-version":[{"id":25668,"href":"https:\/\/azeidkgroup.com\/en\/wp-json\/wp\/v2\/posts\/25067\/revisions\/25668"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/azeidkgroup.com\/en\/wp-json\/wp\/v2\/media\/24884"}],"wp:attachment":[{"href":"https:\/\/azeidkgroup.com\/en\/wp-json\/wp\/v2\/media?parent=25067"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/azeidkgroup.com\/en\/wp-json\/wp\/v2\/categories?post=25067"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/azeidkgroup.com\/en\/wp-json\/wp\/v2\/tags?post=25067"},{"taxonomy":"azeidk_region","embeddable":true,"href":"https:\/\/azeidkgroup.com\/en\/wp-json\/wp\/v2\/azeidk_region?post=25067"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}